I had a guy call me looking for a pass. side axle for a Wagon or Ranchero, it should measure approx. 30 1/2" from the mounting surface of the flange to the end of the spline. The lug bolt flange should measure about 6 1/2" and the bearing about 3.2", if anybody has one let me know and I will forward the info on, He is working on a 57 Ranchero.
I have the axle from a 57 fairlane Victoria, it is 30 1/2 , the bearing is hard to measure seems to be about 3.5. I'm in Milford, Connecticut.
I had a problem answering your message thru this sight, my email is vehicleone@hotmail.com, my phone is 203-877-1066 (talk to my phone machine as my wife screens all calls....Lou
Different bearing and retainer size.
Ron.
Lou, Thanks for checking.
I have one out of a 55 wagon. Colorado
It needs to be out of a 57-59 wagon or ranchero or I've been told a retractable uses the same big bearing axle.
I'll have one in afew weeks or a few months as soon as I change out my 9" if you can wait.
Yes, Retracts and Sedan Deliveries too.
The 56 and earlier Wgns used Dana 44 rears.
Ron.
I have one out of a 57 retract. Contact me at 909-633-8778. I am in San Bernardino, CA