I'm getting rid of the wheels and tires that came on my lowered 57. They're simply too tiny, for my taste, and the tires and wheels are poorly matched.
Here's what I've got:
Front -- 196/60R14 on 8" wide rims. Yes, you read that right -- 8 inches wide.
Rear -- 235/60R15 on 10" wide rims.
The rims are so over-wide that if the pressure drops below 20 psi the tires de-bead themselves.
I'm thinking I'll go with something taller overall. And I think 16" rims up front and 17" rims in back might be about right.
But what do you think? What looks good on a '57? What's on yours?
Dan
Dan, Are you sure your running a 10" wide rim? If you scroll down from your topic you'll see a couple of threads on wheel/tire size combos. 57 Agin is running 15x8 Cragers with 5.450 back spacing/255x60Rx15 BFG's with about an 1" of clearance each side with I believe the wheel well lip cut or rolled on his Custom 300,I'm running 15x7's with 225x70rx15 tires on the rear of my Courier and may be able to step up to 57 Agins size but would be a close fit(rims are Torque Thrusts).How about posting some pictures of your ride in Members Rides section of the Gallery,we all like to see new pics and I'm especially fond of "Longroofs" (don't know why) LOL. KID
Yes, it really is a 10-inch wide rear rim. It has 2-inch offset, leaving just three inches from the back lip to the mounting flange.
The tire is so skinny (235) that the rim is the widest part of the whole assembly; it measures 11" wide from outer lip to outer lip and 10" between the beads. The tire and wheel cannot be removed from the car unless it is jacked up via the frame, so the axle goes into full droop.
The fender lips have been flattened and the tire just barely fits. I wouldn't advise this approach. If the tire were any wider, the sidewall profile would be different and it would rub. But the tire needs to be wider (or the rim narrower) in order for the beads to seat properly.
I'll post some pictures, but I don't have any at the moment that shows this aspect clearly; the car is still awaiting its new fuel tank before I can fire it up and move it outside for better pictures.
Dan
What looks good to you is your opinion only. Do want it to look 50's, 60's or this high tech crap
that the fad right now? You have to decide what look you want and go from there. The traditional
stuff is out there. The tires are available as well (Coker) What do you want it to look like? Once
you make a decision then folks can help you find the stuff you want.
Have fun, Ron
Ron;
I almost sprayed coffee on my key board when I read your responce "high tech crap" I was trying to think of a way to answer Dan but will second your answer.
TOM :unitedstates:
Dan...
I was looking at that sedan delivery to buy about 4 years ago...other than the tire problem...is it a fun car? I think it has a stout 390 in it? I never went to look at it, as I found my wagon.
The guy selling it seemed like a nice guy who was "getting rid of some toys". Said he had about $15,000 in the paint job. He was ready to deal...but I had bought the wagon. Hope it's a great ride...looks fun, and will get plenty of attention!
I vote for the 60s look...plenty of beefy sidewall with a set of Torque Thrusts.
Hope to see you at a cruise night somewhere in So Cal...
Rob
(http://www.ravelers.com/wagon10.jpg)
Dan...
Never mind...I have now seen the photo of your car. Different than the sedan delivery I was looking at out in the San Fernando Valley.
Yours looks great...I would keep the moonies look!
Rob
Dan, I had a '58 Sedan Delivery that I was running deep dish chrome reverse rims with the small dog dish '57 Ford hub caps(white background with raised chrome Ford letters) and by the way it was a bright yellow also which I thought looked like a sweet combo! But as stated "to each his own" I've seen some Boyds and Foose Wheels that I thought looked like crap for $3000. If you go to the front page of this site and click on "Links" then click on "1957 Fords .com" go to "Models" on left hand sideand click on that, it will take you to a list of all '57's made. Check them all out especially '59A-2-dr wagons or '78A-Sedan Deliverys might give you an idea of what they'd look like with different wheel combos.On page 7 you'll see a tutone Dark gray/Silver Courier(Sedan Delivery) that's my baby. Good Luck--KID
This is interesting stuff, I was looking at the wheel and tire combination on the 58 ranchero I just bought, and I got to thinking , The bigger the wheel---16-17" it will help the on & off problem on this car. The bigger the wheel gives you more room to walk it up into the wheelwell. Anyone experimented with this? thanks, Mark
If you leave the spotlights you might consider whitewalls and some nice late 50's full caps. Lancers,
Olds, etc. Just a thought.
Ron
I can't see the rear wheels real good, I wonder if that housing has been narrowed. They look awful wide.
Quote from: Frankenstein57 on 2009-03-16 19:30
This is interesting stuff, I was looking at the wheel and tire combination on the 58 ranchero I just bought, and I got to thinking , The bigger the wheel---16-17" it will help the on & off problem on this car. The bigger the wheel gives you more room to walk it up into the wheelwell. Anyone experimented with this? thanks, Mark
That's my reasoning for my current thinking about 16" x 8 rear wheels. The difficulty with my current set-up, apart from the 10-inch rim width (at the bead seat measuring point--the outside width approaches 11 inches), is the inner wheel lip doesn't quite clear the top of the brake drum when the tire starts to touch the fender. I'm going for more room on two fronts by swapping my 11-inch wide tires for 10-inch ones, and changing the wheels from 15-inch to 16-inch. I'm staying clear of 17 or 18-inch rolling stock because it just doesn't look right, and because the costs go insane pretty quickly.
I'm considering 16 x 7" fronts to go with it, but there's no clearance issue here, of course.
Dan
well i think these are very cool !
(http://i832.photobucket.com/albums/zz243/nastyfordcustom/1zonder.jpg)
O0
just for kicks 69 shelby gt500 wheels (best looking wheels ever) 255/60s on front 275/50 hoosier drag radials on rear no lip rolling I have power steering on my edsel bermuda. :003:
Quote from: 57 Ford Kustom on 2009-03-16 05:32
Ron;
I almost sprayed coffee on my key board when I read your responce "high tech crap" I was trying to think of a way to answer Dan but will second your answer.
TOM :unitedstates:
+1 Ron that was a perfect answer LOL
I have three choices. First would be Torque Thrust Ds. 14" or 15" which ever blows your dress up. Second steel stock wheels with poverty caps. Third steel stock wheels with T-Bird Turbine caps.
I like these on my mine, gives it that early 60's custom look.
Somebody a few weeks ago posted a pic of a red Fairlane with red wheels,beauty rings and baby moons. I'll be darned if I can locate the thread with that pic...seems like it was from someone out of the U.S. somewhere. Anyways..looked really sharp and got me to rethinking what I want on mine. Remember when being different meant getting rid of the old steel wheels/hubcaps?
Feeling a bit dumb right now as have no idea what a T-bird turbine cap looks like,
Zap-
Quote from: RICH MUISE on 2013-10-05 08:27
Somebody a few weeks ago posted a pic of a red Fairlane with red wheels,beauty rings and baby moons. I'll be darned if I can locate the thread with that pic...seems like it was from someone out of the U.S. somewhere. Anyways..looked really sharp and got me to rethinking what I want on mine. Remember when being different meant getting rid of the old steel wheels/hubcaps?
Rich...
Yes! If I didn't have the Torque Thrust wheels that is what I would do. Maybe someday. I have 60 series tires on the front and 65 series on the rear and liking this...lowered in the front with 1990 Aerostar van springs and stock ride height in rear...(and I have since polished the wheels, so looking mucho better)
Rob
Very sharp, Rob
Thank you, sir!
Dang...I didn't see this was a old thread I had already stuck me nose into.
Yours as well!
Found it! I'm really thinking of going this way on mine..just not with the wide whites. The whites look great on this, wouldn't fit the restomod theme on mine. I'd go with matching tarnished silver wheels and red lined tires if I could find them..if not, blackwalls
Rich, I think the Hambers got ya
Quote from: RICH MUISE on 2013-10-09 12:55
Found it! I'm really thinking of going this way on mine..just not with the wide whites. The whites look great on this, wouldn't fit the restomod theme on mine. I'd go with matching tarnished silver wheels and red lined tires if I could find them..if not, blackwalls
Rich, I saw redline tires available somewhere just recently when looking for tires for the mustang, it may have been Coker.
Yes.. red lines are available from Coker or Universal Tires...... Great looking tires
Quote from: RICH MUISE on 2013-10-09 12:55
Found it! I'm really thinking of going this way on mine..just not with the wide whites. The whites look great on this, wouldn't fit the restomod theme on mine. I'd go with matching tarnished silver wheels and red lined tires if I could find them..if not, blackwalls
WOW! THAT is the exact look I want... maybe 20" wheels instead of 17's but thats gorgeous!
You would have to buy new wheels to, looks like those wheels on the red Fairlane are smoothies, which have the nubs on the inside. Wheel vintiques should be able to supply that style of wheel.
Does look pretty good on that car.
I love this look!