Looking for some parts for a Ford Custom 300 that I am working to restore. I need both front and rear bumpers in fair to good condition. But would be happy to at least a rear bumper for it. I am also looking for a radiator for it - have tried to buy one from Fabulous Fords but the one that I need is out of stock and they have contacted the manufacturer and it is at least 6 months out or more. It needs to be for a V8 with 6 Cyl mount. I would appreciate if you have any of these you contacting me or if you could point me in the right direction I would appreciate. Located in WV
Did you check with www.autocityclassic.com on the radiator? Not sure if you'll find 8cyl outlets locations w/ 6 cyl flanges though??? The radiator can be moved forward of it's original position by about 1 1/4 fairly easily though. If you need info on that, just ask.
I believe Auto City Classics has a V8 core size with I6 inlets.
Thank you for the information I will check with them.
Johnny T..........Check your PM (Private Message)
Some history...........When Auto City Classics first advertised radiators for '57 Fords, they showed a pic of a radiator with the outlets on the wrong side. I talked to them about it, as I was ordering my radiator then. They asked me what the outlets showed fit, and I told them "Nothing OEM". As far as I know they never corrected the pic, but verified what I needed was indeed correct in their inventory. Not sure if they actually ever had radiators like what was shown, but I've always advised guys to have them physically check their order to make sure it was what is needed. V-8 outlets with 6 cyl flange locations would be a good thing to have available.
.let us know what you find out.
Quote from: RICH MUISE on 2023-05-15 09:45Some history...........When Auto City Classics first advertised radiators for '57 Fords, they showed a pic of a radiator with the outlets on the wrong side. I talked to them about it, as I was ordering my radiator then. They asked me what the outlets showed fit, and I told them "Nothing OEM". As far as I know they never corrected the pic, but verified what I needed was indeed correct in their inventory. Not sure if they actually ever had radiators like what was shown, but I've always advised guys to have them physically check their order to make sure it was what is needed. V-8 outlets with 6 cyl flange locations would be a good thing to have available.
.let us know what you find out.
Yes, when I ordered my new aluminum radiator from Auto City Classic, I sen they listed a V8 rad with 6 cylinder mounting, but since the photo did not look right, I just ordered the regular V8 radiator. It works fine, but if the rad was another inch or so further forward, I would prefer that.