I bought a kit to convert from power brakes to frt disc. Have everything installed but don,t get enough travel from the brake pedal to to push brake fluid thru the master cylinder. I have been told to remove the power assist under the dash and put in a manual brake pedal. I have also been told this should not be required. I need help. :canada:
Check the length of the push rod. With the pedal all the way up there should be just a RCH of clearance, then check the push rod in the master cylinder for the same thing. Also ask the supplier if the kit was for a power brake car or a manual brake car. It looks like the pedal assembly has a shorter stroke then the manual assembly.
The kit was for a manual brake car.