I need the slip yoke for a 57 T85 with R11 Overdrive. I think the standard trans uses the same yoke. The output shaft measures 1.375 over the splines, it has 16 splines.
Any help, known substitutes or information greatly appreciated.
Richard
A friend of mine needed one, couldn't find one anywhere. I talked to the guy at the local driveline shop. He came up with a yoke for a truck with two piece drive shaft that had the same spline. He turned the unfinished OD to 1 11/16", cut it to length and plugged the grease fitting hole. Fit perfectly. John