Print Page - Steering Ram and seat knob

Title: Steering Ram and seat knob
Post by: outcruisen on 2012-05-04 20:35

Hi all.. After a steering ram (Good rebuilt unit or one not leaking if possible) and a seat udjuster knob for a 57A..

Would need to be prepared to pack and ship to Australia.. Not a big deal I dont think as I have purchased all the bits to rebuild the car from the States already and had no problems so far.. Happy to pay via paypal to make it easier.

Let me know.

Cheers

Title: Re: Steering Ram and seat knob
Post by: oldgasser on 2012-05-06 06:27

I do believe I have an seat ajuster knob but to make sure can you find a photo from a parts book to make sure we are on the same page.
And I have a address of a pal that might help you out on the ram.
Cheers Ron.

Title: Re: Steering Ram and seat knob
Post by: outcruisen on 2012-05-11 01:07

I will see if I can find a picture or part number, but I am after the black plastic knob that screws to the steel leaver that passes through the slot on the drivers side lower seat trim..

Let me know about the ram too as none available in Australia..

Cheers

Title: Re: Steering Ram and seat knob
Post by: oldgasser on 2012-05-13 02:05

Out cruisen:
Here is the address of my pal that repairs Control valves & Rams 56parklane@sbcglobal.net Tom is his name.
Good luck.
Cheers Ron.

Title: Re: Steering Ram and seat knob
Post by: outcruisen on 2012-05-13 20:31

Thanks for that.. Sent your pal an email about the ram.. How did you go with the seat knob?

Cheers

57fordsforever.com

Classifieds => Wanted => Topic started by: outcruisen on 2012-05-04 20:35