Print Page - Wanted - a source for 5/16-24 flathead phillips head machine screws

Title: Wanted - a source for 5/16-24 flathead phillips head machine screws
Post by: BWhitmore on 2011-04-30 20:06

Wanted - a source for 5/16-24 flathead phillips head machine screws - stainless or silver cad plated. Thanks. Bill Whitmore

Title: Re: Wanted - a source for 5/16-24 flathead phillips head machine screws
Post by: BWhitmore on 2011-04-30 20:07

I forgot - I am looking for machine screws that are one inch in length. Thanks.

Title: Re: Wanted - a source for 5/16-24 flathead phillips head machine screws
Post by: cool57 on 2011-04-30 20:12

http://www.mcmaster.com/#flat-head-machine-screws/=c3vxyx (http://www.mcmaster.com/#flat-head-machine-screws/=c3vxyx)

Title: Re: Wanted - a source for 5/16-24 flathead phillips head machine screws
Post by: BWhitmore on 2011-04-30 22:12

Thanks, I checked McMasters and several other fastener suppliers and they all carry 5/16-18 (coarse thread) only. The 5/16-24 x 1 inch fit the tailgate hinges on a Ranchero. I suppose I could cut the striker plate machine screws (1 1/2 " long) that are readily available from all of the classic Ford suppliers. Thanks.

Title: Re: Wanted - a source for 5/16-24 flathead phillips head machine screws
Post by: Partsman on 2011-05-02 10:34

Restorationspecialties listed in links has them in correct thread and length.
Hope this helps.
Bill

Title: Re: Wanted - a source for 5/16-24 flathead phillips head machine screws
Post by: BWhitmore on 2011-05-02 14:33

Thanks Bill

Title: Re: Wanted - a source for 5/16-24 flathead phillips head machine screws
Post by: outcruisen on 2011-05-16 06:29

I used them and they are very helpfull.. Cheers

57fordsforever.com

Classifieds => Wanted => Topic started by: BWhitmore on 2011-04-30 20:06