I'm planning to run a 351 van/ truck engine in my 57. I bought a oil pan on ebay ,but it was for a car 351. My van engine has a larger rear main. Anyone know of a front sump pan to fit the larger rear main? And while I have your attention, would a 302 roller cam setup work in a 351-with longer pushrods? Thanks, Mark
Im using a 351W out of a 78 van in my ranchero and swapped the pan out with 76 torino 351W with no problem also had to change the pickup tube.As far as I know all windsor pans should be the same bolting up to the block.
Hey all you ford experts, I'm counting on ya. I know the 351 truck engine has a larger rear main, cause the pan won't go on.....Help!
I think that you might have a pan off of a 302 ,looks the same with a smaller rear main. All 351w have the same size rear main, car or truck. hope this helps Tom
That was the problem, I bought a 351 pan, bolts right on. Anyone needs a front sump 302 chrome pan, I think I paid about $35 plus shipping, Mark