Guys, trying for a secOnd time to get my car on the road, but with no luck! The engine will not crank, I tested and the power is at the starting soneloid in the crank position. No power to the starter terminal! I changed the starting soneloid, but still nothing, no power to the other starter terminal. Should I get a voltage reAding? Help if you can! Tim
Use a screw driver and jump the battery terminal to the start ( S ) terminal on the solinoid, if it cranks try swaping the two small wires.
fBb, I have power from the ignition , I ended up taking the power from the starter and hitting the battery side of the solenoid to start it. How can I test the solenoid? One was new, the other was an old One that I had on it, but that one was working
Try swapping the two small wires. I had the same issue and swapping the wires took care of the problem. If that does not, recheck all connections. I am assuming that the starter motor itself is proven to work OK. Bill gave me the same advice a few months back and he was right.