The Custom 300 I recently bought has all the wrong molding clips and they do not hold the trim tight. When I had the last 300 I thought I remember seeing a chart that told what clip and how many go where. I can't seem to find one now. Am I having old man crs? I could have sworn somebody had kits.
Trim and sealant manual. Front fenders are in the chassis assembly manual....go figure...
Thanks for the info. As luck would have it, I found both manuals for my 63 Galaxie but cannot locate the ones for the 57.
2-dr or 4 dr (70B) has 2 different moldings one has a check mark molding. Other has an wide insert.
(73B) has 2 different moldings same as above but for a 4-door.
Quote from: Sandiaman on 2015-08-03 17:12
2-dr or 4 dr (70B) has 2 different moldings one has a check mark molding. Other has an wide insert.
(73B) has 2 different moldings same as above but for a 4-door.
Incorrect I believe....That difference is in the Custom(70A, 73A?)has the checkmark vs Custom 300(70B, 73B?)which has the full length trim w/ insert. The Custon 300 that he has has the insert. I don't know if his is a 2 dr (70B) or a 4 dr (73B?)
70=2 dr
73=4 dr
A=Custom
B=Custom 300
also 70D Business 2dr sedan..has same trim as 70A. There is no 70C.
Here is a pic of the moldings for a 70B 73B
Mine is a 70B. Thanks a ton for the pics. Now to find them. Great response.
Here is a good aftermarket source of HARDWARE- https://www.auveco.com/product/auto.html