guy's i need a lower crank pulley , 3 groove for a FE 390 motor.
Don't know that they exist but do know a two groove harmonic balancer and a steel pully work. Had it on my AC equiped 62 T-Bird. Many of the T-Bird suppliers have the two grove balancer.
ok , if thats the case , the water pump runs off the crank pulley the alternator runs off the crank and water pump and the a/c runs off just the waterpump pulley????
I have a 2 groove bolt on A/C crank pully. (bolts to the crank pulley) I took it off a 60 T-Bird 352, with dealer installed Ford A/C. Make me a offer. Hotmail email vehicleone
Nope.....stock 62 Bird had dual belts for water pump and generator (converted mine to alt.). The water pump pulley had three grooves, the forward most was for the A/C. The crank shaft had three grooves and the forward most was the power steering pump. Thinking about it it seams like the crank pulley may have had only on groove and the steel pulley had the two. Been too long ago and the car is sold. But I do know for sure the belt arrangement is correct for the 62 Bird.
Hi Bill
I remembered having this pulley set stashed away in the garage. I think they were off an early 60's T-Bird with a FE 352. Was wondering if this was what you were looking for. Please let me know. rcoffice@aol.com
Rick
57 Tudor
thanks for looking rick , but i've got the pulleys i need out of california. i'm using the later style stamped steel type pulleys but have what i need now , thanks again.