Would anyone have an extra brake and clutch peddle assembly that they would be willing to part with? We are putting a 312 with a 4speed toploader in an automatic car. Was going to go with a Wilwood set but we have decided to go with the factory look. I am in Ohio but would obviously buy from anywhere. Thanks for the help!
This is the start.
https://photos.google.com/photo/AF1QipOsJAKkLOapPHntdgNqCLNNjDyb_c3LsMs5a1Gr
No photo
Hello Someone had a almost complete assembly for sale on one of the Ford forms not long, can't remember which one. The hardest part to find I found was the pivot bracket on engine, most went to scrap with engine.
Quote from: Dsmoothy1 on 2026-02-04 09:56Would anyone have an extra brake and clutch peddle assembly that they would be willing to part with? We are putting a 312 with a 4speed toploader in an automatic car. Was going to go with a Wilwood set but we have decided to go with the factory look. I am in Ohio but would obviously buy from anywhere. Thanks for the help!
PM/Private Message sent to you
John
John, Are you familiar with Malwood Hydraulic clutches? They put the clutch master cylinder under the dash and their kits come with a clutch pedal. I am using their set-up and it is VERY simple and easy to install.
Lynn
Lynn.........I was responding to the "wanted post" for the brake/clutch pedal assembly. I could not open the attachment to see if what was wanted is the same as what I have that,I'll part with.........A picture is worth a thousand words.
Have not heard back on my PM.
John
I realized that after I posted. I tend to leap before I look.....
i have what you need, give me a call........ tobby 818-990-0590
Quote from: lalessi2 on 2026-02-07 10:02John, Are you familiar with Malwood Hydraulic clutches? They put the clutch master cylinder under the dash and their kits come with a clutch pedal. I am using their set-up and it is VERY simple and easy to install.
Lynn
So if converting 57 Fairlane with Automatic, just install in the factory perdal assembly, and trim the big brake pedal? Or, is this pedal assembly not compatible with this kit by itself?
The brake pedal pad just bolts on to the vertical arm of the brake assembly with one bolt. Look at the backside of the pedal pad and you will see the bolt.
Quote from: Gene on 2026-03-04 14:36So if converting 57 Fairlane with Automatic, just install in the factory perdal assembly, and trim the big brake pedal? Or, is this pedal assembly not compatible with this kit by itself?
The Malwood clutch pedal is different from the factory pedal but I believe it will fit in an automatic pedal assembly. I am pretty sure the firewall bracket and brake pedal are the same for autos and sticks except for the actual bolt on brake pedal.
Lynn
Thank you both. There very well may come a day where I put, or have installed a 5-speed Tremic in my Skyliner.
I have the pedals with new pads for a custom. I do not think I have any of the other linkage but I will check. I am in north west Ohio.