Well, I have good news. All of my pass side floor pans are in, gooped and painted! I have to just replace the driver floor pan next-again:(. So I am starting to think about seat belts now since I have everything out. I have been reading up on the post here but just want to make sure I am clear in my thinking. So here are my questions:
1) Will retractables work with my seat in the wagon? Or will the seat to B pillar cause interference issues?
2) For those of you have them, how did you install them? According to Juliano's (I know it is a 56) did you mount it to the B Pillar or the floor? I am guessing the B pillar but where did you install it?
I am getting more and more excited to get her on the road!!!!
Thanks,
Mike
one way of doing it. Comfortably fits me.
more PICs
Gasman thanks, I had heard that the retractor would interfere with the seat. But these show me were and what needs to be done. Where did you get them?
Mike
...bought these way too long ago to remember where I bought them. There are several vendors specializing in retro seat belts. Not the place to cheap out but SEM 5 point would be overkill.
Yeah, I know and I am thinking Juliano's.
Mike
When I added the Juliano's 3 points in my 67 XL I mounted the upper anchor point to the rib under the headliner. The problem was the belt was too high and rubbed on my neck. I pulled 2 of the plastic sleeves that covered the belts from a Ford van. I put chain in the sleeves which lowered the chest belt to a comfortable location.