57fordsforever.com

Classifieds => Wanted => Topic started by: Edd505 on 2026-08-09 11:34

Title: Vibration Dampner
Post by: Edd505 on 2026-08-09 11:34
Looking for a Vibration damper for a 312.  Working on it I saw the one on the engine is almost rubbing the oil pan.  The rubber inside has failed and let the outer ring move back.  Shipped to 87935
Title: Re: Vibration Dampner
Post by: Ray on 2026-08-09 15:17
got one, it's good. In primer, very little wear at the seal but it does look like someone cleaned it up a little at some point. $50 plus shipping sound ok?
Title: Re: Vibration Dampner
Post by: Ray on 2026-08-09 16:38
quick update, just fyi. ECG-A2
Title: Re: Vibration Dampner
Post by: cos on 2026-08-10 09:26
Hello  T-Bird fellas usually have them rebuild as bird dampers are harder to find used and if you do facing same issue down the road.
Title: Re: Vibration Dampner
Post by: Edd505 on 2026-08-10 13:58
Quote from: Ray on 2026-08-09 15:17got one, it's good. In primer, very little wear at the seal but it does look like someone cleaned it up a little at some point. $50 plus shipping sound ok?
sounds like a deal PayPal?
Title: Re: Vibration Dampner
Post by: Ray on 2026-08-10 15:08
Sure, I have to figure out what my Paypal account is. Text or call and we'll sort out the shipping address and such. I might have call back if you call me since I am still vessel business and might be busy with some new panic.
Title: Re: Vibration Dampner
Post by: geraldchainsaw on 2026-08-10 21:18
little story,    I just replaced my HB,   the orig went bad,  went to afriend that had a old 1 sitting around,  I put it in,  it failad in on season.  fou nd a [place that rrebuilds them,  if yhou can wait ui ntil tomorrow I'll look up the address for you,  the guys in calif.
Title: Re: Vibration Dampner
Post by: Ray on 2026-08-11 09:42
I did find my paypal, It's socalsitefinder@gmail.com
Title: Re: Vibration Dampner
Post by: mustang6984 on 2026-08-11 10:48
Sent a couple of PM messages...
Title: Re: Vibration Dampner
Post by: mustang6984 on 2026-08-11 13:58
The above post...was meant for Ray...
Sorry for not making that clear...my bad...