Print Page - Lowering front end of 57 ranchero

Title: Lowering front end of 57 ranchero
Post by: sgtrock on 2009-04-22 16:29

Do any of you guys have any Ideas on lowering the front end? I know the coils can be cut or replaced. How about granada spindels?

Title: Re: Lowering front end of 57 ranchero
Post by: 57 Ford Kustom on 2009-04-22 18:15

Granada spindles and 3" lowered springs from Jamco. is what I have.

TOM :unitedstates:

Title: Re: Lowering front end of 57 ranchero
Post by: KidKourier on 2009-04-22 18:47

Granada/Monarch spindles(2" drop)or Jamco low profile springs(1",2"or 3" drops)or '90's Ford Aerostar springs((2"-3" drop) Part # CC850 from Moog or Fatman Fabrication for 2" dropped spindle or "Drop-N -Stop for complete disc brake/spindle kit. KID

Title: Re: Lowering front end of 57 ranchero
Post by: tarheel57 on 2009-04-22 19:55

Fatman Fabrications at (704)545-0369 or www.fatmanfab.com also offers a 3" drop spindle.The drop spindle does not create bumpsteer and allows the steering arm and linkage to remain in the correct position for proper steering geometry :burnout:

Title: Re: Lowering front end of 57 ranchero
Post by: sgtrock on 2009-04-23 20:06

Thank you guys for the very valuable information !!!!!! :001:

Title: Re: Lowering front end of 57 ranchero
Post by: cool57 on 2009-04-26 13:28

Quote from: tarheel57 on 2009-04-22 19:55
Fatman Fabrications at (704)545-0369 or www.fatmanfab.com also offers a 3" drop spindle.The drop spindle does not create bumpsteer and allows the steering arm and linkage to remain in the correct position for proper steering geometry :burnout:

I have Fatman spindles, expensive, but work great.

57fordsforever.com

General Category => General Discussion => Topic started by: sgtrock on 2009-04-22 16:29