Ok Bros, I KNOW some of you have done this before, so I thought I would ask.
Is there an easy way, other than removing the grill or splash [gravel] shield to remove the parking light assembly???
BuBBa :006:
Can you not go in from behind (hood off)? Hood is much easier then the grill or the splash pan!
I went out and looked at all the components...my car is not assembled...my guess it would be a hell of a reach from in front of the radiator to get to the two nuts holding it on...particularly the outer nut as the lamp housing and wiring will be in the way. I would think even if you could reach it with a long handled ratchet,if you can't get you're fingers on the outer nut to reassemble,it'd be really frustrating to reassemble. I'd go for the grille removal..at least you're not dealing with a painted panel. just my 2 cents.
Rich and Bill:
Given the choice I will always opt out for the path of least resistance.
Looks like grill surgery is the only way out.
Break out the Areokroil and PB Blaster!
BuBBa
Bubba the grill is much easier with the head light buckets out. I feel the hood off will give better access than you will have taking the grill out. Still have to reach in for two fasteners on the grill or work with two clicks per turn with a fine toothed ratchet for the inside two bolts/nuts. Just a thought......
speaking of ratchets...the handiest one I've ever owned by far is one made by Stanley. Not only does it ratchet in the normal way, but you can also ratchet it by twisting, or rotating,the handle, which makes it incredibly nice when you don't have alot of room to click a couple of teeth. Also is great when you have a nut or bolt so loose the ratchet won't "gear back", and you can't get your other hand on the socket or extension to hold it.
Well Bros the grill is out!
Thanks for all the advice especially about the headlight buckets.
What I found out the hard way is that at some point in the Ole Fode's life someone removed the grill and replaced it with a series of non matching, English and metric nuts bolts and screws! A curse upon him and his family for 10 generations. What I can assure you is that when it goes back in it will be with all matching, non rusting, stainless steel U.S. standard hardware.
BuBBa
Amen brotha !