Print Page - NEED BODY MOUNT TORQUE SPECS

Title: NEED BODY MOUNT TORQUE SPECS
Post by: RICH MUISE on 2011-03-12 20:12

i LOST THE DIAGRAM i HAD SHOWING THE SEQUENCE AND TORQUE SPECS FOR THE BODY MOUNTS. i THOUGHT IT WAS IN THE REPAIR MANUAL, BUT IF IT IS IT'S HIDING FROM ME. If someone has it or knows where I can find it please post. Thanks Rich

Title: Re: NEED BODY MOUNT TORQUE SPECS
Post by: Bubba on 2011-03-14 10:42

Rich:
What size and grade are the bolts I can get that info from one of my M.E. Manuals.
BuBBa

Title: Re: NEED BODY MOUNT TORQUE SPECS
Post by: Bubba on 2011-03-14 11:18

Rich:
Here you are my freind
http://www.engineershandbook.com/Tables/torque.htm
BuBBa

Title: Re: NEED BODY MOUNT TORQUE SPECS
Post by: shopratwoody on 2011-03-14 13:10

Bubba,
I don't think that's the answer :003:

Title: Re: NEED BODY MOUNT TORQUE SPECS
Post by: Bubba on 2011-03-14 16:29

LOL its about half of the answer, the tightening sequence is the other half and right now it's the missing link LOL!
BuBBa

Title: Re: NEED BODY MOUNT TORQUE SPECS
Post by: RICH MUISE on 2011-03-14 18:29

Got 'er done.I found the torque specs on the bulletin that Gary (Canadian Ranchero) posted a few weeks ago. It's 18-22 ft. pounds. I couldn't find the sequence but I did remember to tighten to the 22 lbs gradually using a side to side sequence starting in the middle and working my way to the front and back. Should be just fine. Also I didn't have any tightening problems as suggested might happen in the bullitin. Thanks for the help Bubba. Rich

57fordsforever.com

General Category => General Discussion => Topic started by: RICH MUISE on 2011-03-12 20:12