Hate to do it but I need to thin the heard down to a managable number of cars. The 57s are only part of the heard and would like to get down to only one of them. Have not been pushing to sell but have realized life is too short to spend ALL of it in the shop! Can't afford to hire the work, so here goes......
Fairlane 500 2 Dr. Ht. SOLD
Retractable, complete FL car with typical 57 rust. 292/auto. Floor pans need patches, trunk pan good with only one area needing a small patch, rockers are bad, quarters are good. Fenders, splash pan and hood weak, grill good, no dents, just worn out chrome. Deck lid has rust in the gasket area but is not terminal, roof is weak at the joint. Top system worked prior to storage.
$4500
Ranchero is fairly good. Needs pans and rockers, no glass. doors, roof and bed all good. Quarters are good as is the tail gate. Have all the bed trim in great shape including the tight corners at the top of the cab (freshly plated). No engine/transmission, was 292 3 speed OD. Rear bumper guards freshly plated, bumpers need plating.
$2500
Email for pictures, specify what you want for pics and I will provide, thanks,
Hold the texas 2 door hardtop for me Bill...my dad wants one and this onesounds good...he is close to you too....i can look at it when i pick up the 292s...
James you have first right of refusal......
James passed on the car, his father bought a different one so the car is back on the market.
The Fairlane has an awesome body, almost zero rust on the car. It is a good deal for what he's asking for it, someone will get a good car to build with this one.
Bill, I'm interested in the ranchero. I've got a ton of work in my 57 body, and it still needs quarters, rockers,and cowl work. If you can, email pics to markeckert98@yahoo.com. thanks, Mark
Mark will have to wait until the monsoon passes but I'll get them off to you.
Mark check your email.....
Do you still have any parts cars the 57 retractable? Looking for the rear seat floor section under the seat. Thank you
No parts cars, my retractable has three small holes in the same area, nothing serious, can all be patched with less then a sheet of paper sized sheet metal.
Could you send your phone # or call me Larry Malmgren 651-436-6386