Print Page - Ramhorn Exhaust manifolds

Title: Ramhorn Exhaust manifolds
Post by: BAMA_57 on 2011-08-17 20:31

Has anyone tried these? See link; http://www.ford-y-block.com/Ramhorn.htm (http://www.ford-y-block.com/Ramhorn.htm) They look like they would flow better than the stock ones. I've also seen some y-blocks with headers on YouTube but have not seen any for sale. Custom made would be expensive I would think http://www.youtube.com/watch?v=brQwMEIOGds (http://www.youtube.com/watch?v=brQwMEIOGds).
Ron

Title: Re: Ramhorn Exhaust manifolds
Post by: canadian_ranchero on 2011-08-17 21:44

ford used ram horn manifolds on the tilt cab trucks on the y block from 57 to 64

Title: Re: Ramhorn Exhaust manifolds
Post by: BAMA_57 on 2011-08-18 06:06

Yes I know, I meant has anyone tried them in their '57 CAR? Just wondering as they are being reproduced as an upgrade? Check the link above.
Ron

Title: Re: Ramhorn Exhaust manifolds
Post by: RICH MUISE on 2011-08-18 06:13

The website says they will not fit a passenger car....don't know if it's an interference problem or if the heads on the truck motors are different.

Title: Re: Ramhorn Exhaust manifolds
Post by: Hoosier Hurricane on 2011-08-18 07:27

Rams horns will not fit a passenger car because the outlets are right above the crossmember that has the engine mounts. The bolt pattern on all Y block heads are the same, that's not the problem. They are being reproduced. John

Title: Re: Ramhorn Exhaust manifolds
Post by: BAMA_57 on 2011-08-18 11:55

:iamwithstupid: LOL guess I need to learn to read the small print. Thanks.

Title: Re: Ramhorn Exhaust manifolds
Post by: shopratwoody on 2011-08-18 13:01

I'm sure you can buy ready made headers also.

57fordsforever.com

Technical => General Tech Discussion => Topic started by: BAMA_57 on 2011-08-17 20:31