57fordsforever.com

Technical => General Tech Discussion => Topic started by: Limey57 on 2011-12-28 12:46

Title: Rear brake drums, what years???
Post by: Limey57 on 2011-12-28 12:46
I have two new drums for my 57 Ranchero but one is chipped  :angry4: .  To help me source a new one over here, can anyone tell me what other years/models using this axle use the same drums, or are they unique to 57's?

Thanks
Title: Re: Rear brake drums, what years???
Post by: RICH MUISE on 2011-12-29 07:00
Limey..someone else will have to answer your question on which years will work..but just a heads up..I do believe not all '57's are the same. If I remember correctly the wagons and Rancheros had wider drums and shoes than the passenger cars.
Title: Re: Rear brake drums, what years???
Post by: deereford on 2011-12-29 12:42
hi, According to my Hollander interchange 57-59 SW, SD, Ranchero, Retract,taxi, police, 58 Edsel SW, 59 Edsel, 60 Edsel, 60 Ford Pass, & 59&60 T-bird should fit. Kind of a limited selection. Good luck hunting. Brad
Title: Re: Rear brake drums, what years???
Post by: Limey57 on 2011-12-29 14:25
Thanks guys, all pretty rare over here but theres a few old-timer salvage yards that are full of cars left by ex-US Servicemen that brought their cars over here with them & dumped them when they returned home.  Most of the bodies are completely rusted away, but brake drums might be okay, if I can get them off!!!
Title: Re: Rear brake drums, what years???
Post by: Alex L. on 2011-12-29 15:05
I doubt that 50 year old junkyard brake drums are going to be better than what you already have.
Title: Re: Rear brake drums, what years???
Post by: shopratwoody on 2011-12-29 17:51
A couple years ago Briney mentioned the replacement rear drums he got were thicker in the center
than the originals. Longer studs were used, less clearance I'm sure. His rear radius were big anyway
so probably didn't bother his. Check it out before changeing
Title: Re: Rear brake drums, what years???
Post by: deereford on 2012-01-01 21:54
Hi, I got to thinking, and if the chip isn't to bad, round off the edges with a die grinder and don't worry about it. Very few people will ever see it, and shouldn't be a safety concern. If it's an inspection thing, fill in with metal epoxy and paint over it. Good luck and happy new year. Brad
Title: Re: Rear brake drums, what years???
Post by: Limey57 on 2012-01-03 07:24
Thanks everyone.  I tapped each drum with a spanner to see if they "rang" the same or whether the chipped one was just a dull "thud".  Both sounded exactly the same so I'm doing as Brad suggests and just rounding off the sharp edges with a die grinder.

Happy New Year folks.