Text only | Text with Images

57fordsforever.com

Technical => General Tech Discussion => Topic started by: Slimjim652 on 2012-05-07 01:03

Title: Fordomatic transmisson cooling lines
Post by: Slimjim652 on 2012-05-07 01:03
Does anyone know if these will work on a 57.  Mac's has them listed as 1956 not sure if they will be compatable.  If not does anyone know where I can get a set for a 57 Ford Fairlane 500?

http://macsautoparts.com/1949-59-ford-mercury-transmission-cooling-lines-2-pieces-ford-only-b6a-7a031-st/camid/F50/cp/JS0R3CHL1085682/
Title: Re: Fordomatic transmisson cooling lines
Post by: wv 57s forever on 2012-05-07 06:24
i use brake line bend it myself.
Title: Re: Fordomatic transmisson cooling lines
Post by: sprink88 on 2012-05-07 12:51
Same here on the brake line. I think a 51" cost me 6 or 7 bucks
Title: Re: Fordomatic transmisson cooling lines
Post by: rmk57 on 2012-05-08 18:29
Brake line is usually 3/16, kinda small for trans cooler lines I think. Stock ones were either 1/4 or 5/16. Fuel line comes in that size, you can buy them with inverted fare fittings already on them in various lengths. 
Title: Re: Fordomatic transmisson cooling lines
Post by: Slimjim652 on 2012-05-18 18:39
I was able to locate a pre made set through Summit.

http://www.summitracing.com/parts/RSD-DTC5701/Application/?query=Submodel|500|CID|292
Text only | Text with Images