hello guys. i'm trying to put a tripower on my 57 w/312. mine must be later because the draft tube is on the rear and the manifold hits it. i need a 312 draft tube that goes on the front. please let me know. thanks skip
Had the same problem with mine. The way I solved it was to get rid of the draft tube, pull the valley cover & fab a pcv system where the draft tube goes. I ran a steel line to the fitting between the front two carbs & connected a rubber hose to a 302 pcv valve. You end up with a better functioning system when your done. Let me know if you need more info.
not sure exactly how to do this. i really would like a draft tube if possible. thanks and if i have to i will use your idea. thanks skip
Road draft breather on Ebay
http://www.ebay.com/itm/190729634084?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
thank you all for the help