57fordsforever.com

General Category => General Discussion => Topic started by: oldgasser on 2013-02-12 20:01

Poll
Question: Location of bulbs
Option 1: Bulbs votes: 0
Option 2: Location of bulbs votes: 0
Title: dash bulbs
Post by: oldgasser on 2013-02-12 20:01
Could anyone tell me the type or # of the dash instrument bulb or bulbs in the 57 dash assembly & the location of the bulbs if there is more than one kind.
Than You.
Ron.
Title: Re: dash bulbs
Post by: 57 Ford Kustom on 2013-02-12 20:21
My bulbs in the instrument area are 1445 bulbs, the ones in the heater control, clock,and ignition area are also 1445 bulbs, but the glass is just bigger.
Tim :unitedstates:
Title: Re: dash bulbs
Post by: clusterbuster on 2013-02-13 12:56
The instrument light bulbs are #57. There are 2, one on each side. The sockets plug into the back of the speedometer face, one on each side. Both of those lights illuminate the speedometer, fuel and temp gauges. I believe the wires are blue and red leading to the sockets. The heater control panel also has a #57 bulb that lights it up. You have to drop the air vent to get at that bulb. There are two screws that are easy to get at to drop the vent.
Title: Re: dash bulbs
Post by: 57 Ford Kustom on 2013-02-13 15:26
Cluster,
   Really? I have my harness out, and every bulb is marked 1445!
Tim :unitedstates:
Title: Re: dash bulbs
Post by: gasman826 on 2013-02-13 15:45
If I remember correctly there was a reason that you have your harness out?  Something about not being able to figure it out.  I think you just figured something out.  I'm not sure that bulb number was invented in 1957.  The number 57 bulb was common in almost everything for dash illumination in the '50s and '60s.  By late '60s, the push in (#1994 or something like that) all glass bulbs were introduced.  Ford has used the blue with red stripe colored wire for dash illumination for more that 50 years including trucks.
Title: Re: dash bulbs
Post by: 57 Ford Kustom on 2013-02-13 15:57
Gasman,
   I have the harness out because I am repainting the interior metal. Yes it is true my wiring was a mess, but the instrument panel is all original. But, it has been around since 57' and the old saying is "to many cooks ruin the soup". Lol :003:! I apologize if I led anyone astray, it was not my intention.
Tim :unitedstates: