Print Page - Reamer for front spindle's lower ball joint.

Title: Reamer for front spindle's lower ball joint.
Post by: jumping jack flash on 2013-12-15 18:58

Where can I get one of the reamers for enlarging the hole in the spindle for the lower ball joint. I'm installing late 70's spindle and disc brakes. The top ball joint is a bolt up, with even the same part number for the upper ball joint. The lower will fit with a slight reaming to enable a fit.

Title: Re: Reamer for front spindle's lower ball joint.
Post by: Zapato on 2013-12-15 20:06

Speedway has it

Zap- :unitedstates:

Title: Re: Reamer for front spindle's lower ball joint.
Post by: rmk57 on 2013-12-15 22:32

Got mine from a company called xkut.http://www.xkut-reamers.com/
1 1/2 TPF 7 degree taper. Used on lower balls and tie rod ends, works great.

Randy

Title: Re: Reamer for front spindle's lower ball joint.
Post by: jumping jack flash on 2013-12-19 09:26

Thanks, I will go with the speedway reamer. :burnout:

57fordsforever.com

General Category => General Discussion => Topic started by: jumping jack flash on 2013-12-15 18:58