My Courier is pretty solid, just has a couple rust spots by the side tailgate windows, tough spot to fix. Much rather swap in a solid gate than try to remove windows, worry about wending warpage etc. Anyone have a solid one? Also could use an extra hood- one with a previous scoop hole would be fine
Sorry, I don't have one...that's really hard to find item I would guess. If you do find one, please don't trash your old one..somebody will want it. Welcome to the forum, btw.
Pretty solid other than those two little spots in the tailgate- original paint
(http://pic20.picturetrail.com/VOL75/2176019/24279591/408498425.jpg)
WOW! More pictures please. Thanks
(http://pic20.picturetrail.com/VOL75/2176019/24279591/408498424.jpg)
(http://pic20.picturetrail.com/VOL75/2176019/24279591/408501170.jpg)
I have always loved Ford Sedan Deliveries. Several years ago I restored a 1946 Ford sedan delivery. You have one nice delivery. What are your plans for it?
That's a great looking courier! original to boot....how long have you had it? "Two small reust spots on the tailgate"....x2 what I said earlier...those are really hard to find in any condition...well worth the effort to get yours repaired.
I'd like to see pics of the rust, that car looks like new!
Fix it and count yourself luck that you have one.
Hoods come along from time to time. Just make sure and check the leading edge and battery area substructure...first place to rot.
sweeeet rig
Awesome car,. What wrong with the hood? I'd much rather have that then my Ranchero
Nothing at all wrong with that one, like to find another one for a "project" :002:
> fingers in ears < I don't want to hear you are going to modify this beautiful car.
Jim - is the tailgate for a Ranchero/wagon the same as a sedan delivery?
Quote from: BWhitmore on 2014-03-01 14:17
Jim - is the tailgate for a Ranchero/wagon the same as a sedan delivery?
I'm not 100% sure but I think the wagons/sedan delivery are different from rancheros.
I am almost 100% sure that the tailgates on the wagon and Ranchero are the same. Not sure about the sedan delivery but one would think they are the same.
All the tailgates and window lift gates are the same . The lift gate on the delivery is a tailgate and lift gate bolted together .the reason there is three windows is because of the two support braces that help hold the unit together . You could order a delivery with the normal tailgate lift gate and even with rear windows.
Yep, bolted together lift gate. The rust spots are below the corner windows, looks like water got in through gaps in the gaskets in the brace area
Don't want to "modify" anything that can't be put back- hence, looking for another hood- got lotsa interesting stuff that could go under it :icon_madu:
Gene,
You know a FE fits with stock motor mounts and I know you might have one or two lying around.
I dunno, I think I'm down to 8 427's right now- going thru withdrawals :sad5:
But then again, the one I just sold bought me this '57- plus :003:
And a few pieces from Mr. Albert Gonzalves...
Choices, choices... Just got a set of FPA headers for a long deal from a friend, so I'm pretty committed- and I just love my 427's... Gotta keep my governor on and do a mild one, so I can drive it a little- the mileage on this one with a 4K converter and 5.14's doesn't even compute :tard:
(http://pic20.picturetrail.com/VOL75/2176019/24279591/403322616.jpg)
Also just got a cherry set of original ALGON adjustable nozzles, and I already have pretty much the whole original setup, needle-type control (instead of a barrel) valve, aircraft pump, even the cast front cover with pump drive- but that should go on the Galaxie. Still, if I had another hood... So I'm thinking that cherry 324/500 cam out of a boat engine, and my Bird 6V setup- and the air cleaner just happens to have been trimmed at the back at some point, which seems to be a tight clearance area in a 57, so I wouldn't have to cut one. Also have a set of those sweet polished aluminum boat "spark arresters" that could spend some time on there. Got a couple sets of original chrome baldie covers, so the set with the breathers could go on there. And the pickup 3spd w/OD toploader for a little mileage. Still thinking..
I would like to know if they are different and how.I bought a tailgate at portland swap meet that was marked ranchero /wagon.It has the hardware in the top for a wagon latch and a ranchero bull mounted on it. I noticed a contour a the top where my bed chrome goes on.I dont know if the top of my gate has a removable piece that covers this or not.I have not had time to tear into it.Moral of the story is....If I have the wrong unit for my chero I probably have just what you need.
Al
The tailgate is the same, you need to remove the latches for the lift up wagon window and install the metal trim cap from a ranchero tailgate and then the stainless trim piece goes over that.
Thats what I was guessing,but just have not taken it apart yet.Thanks Al
btt- still looking. Got lots of interesting trading material/bait too- especially FE stuff