I'm installing the factory Swift Sure Power brake unit in my car. Would someone with that unit please take a picture of his firewall for me so I can see exactly what hole is used for the vacuum hose. I would like to do it correctly the first time. Thanks in advance. Jay
Can't answer your question, but I'm wondering where you came up with that silly concept of doing it right the first time? That's just not how things are done, Jay.
Yeah Rich
That is silly isn't it?
FWIW That is a 1958 Ford illustration of the unit because my 1957 Ford shop manual does not have a better/complete one.
So I have to go to the experts who know for sure which way to run that hose.. Jay
If and when I see the one local Fairlane again I'll see if he has power brakes. I know the other two 57's in the area don't.
Where E-codes available with power brakes? Does the 2x4 manifold have a vacuum port?
When i can dig thru the the snow i'll check for you.
Ron.
Quote from: SkylinerRon on 2015-02-22 00:50
When i can dig thru the the snow i'll check for you.
Ron.
Ron
Thank you very much. I certainly will look forward to that but don't do too much snow digging if you can help it.
Jay
Here is a pic of were the hose goes thru the firewall on my 58 ranchero with factory installed sure swift PB . The hose is in the hole next to the wire bulk head hole. Hope this helps
Dgasman
Thank you very much.
That's perfect now I can punch that particular plug out.. It looks like you have a dual master cylinder like I do. Is there any improvement with the Swift Sure system? Jay
Here it is on my 57.
Quote from: junior58 on 2015-02-22 19:00
Here it is on my 57.
Steve
Thank you very much for the picture. Now it is very clear where the hole location is. Jay