Print Page - lower ball joints

Title: lower ball joints
Post by: 57 imposter on 2016-04-07 13:26

Does anyone know the tapper of the lower ball joint stud?

Title: Re: lower ball joints
Post by: canadian_ranchero on 2016-04-07 18:20

1.5 inch per foot.look at my engine swap post reply 106,it shows a picture of the reamer

Title: Re: lower ball joints
Post by: 57 imposter on 2016-04-07 20:41

Im a little confused, you are showing the tie rod end. Is the taper the same on the ball joint stud?

Title: Re: lower ball joints
Post by: canadian_ranchero on 2016-04-07 22:32

yes, the reamer that i have is used for both

Title: Re: lower ball joints
Post by: 57 imposter on 2016-04-08 12:52

Thank You

57fordsforever.com