57fordsforever.com

General Category => General Discussion => Topic started by: Randyh on 2016-09-09 17:15

Title: Reproduction Wiring Harnesses
Post by: Randyh on 2016-09-09 17:15
Looking for a recommendation on which vendor has the closest to original wiring harnesses for a Custom.  I have found YNZ and Narragansett, there maybe others, that claim to be like the oriignal.  Can anyone give a recommendation on what to use?  I am going to replace all of the wiring in car.
Thanks, Randy
Title: Re: Reproduction Wiring Harnesses
Post by: Lou on 2016-09-09 20:12
It has been some time since i installed their wiring harness I was very happy with Narraganett product.
Title: Re: Reproduction Wiring Harnesses
Post by: Randyh on 2016-09-12 05:44
Thanks for reply I will look at them more.
Title: Re: Reproduction Wiring Harnesses
Post by: petew on 2016-09-12 07:47
I purchased my harness from Narragansett about 3 years ago . It is a good product but I did have some minor issues.

I had ordered battery cables from them as well as part of the package but it took 2 months and several phone calls to finally get them. Of course they had already been paid for ...
The other issue happened just 2 weeks ago. Went to take the car for a ride a couple of Sundays ago and found that the gas gauge didn't work . After an hour of trouble shooting I discovered that the molded end on the sender wire at the gas gauge was bad. Clipped the end off , replaced it with a ring connector and the problem was solved.

These are minor things and overall they have a good product , the harness fit well and the instructions provided were good.
Title: Re: Reproduction Wiring Harnesses
Post by: BWhitmore on 2016-09-12 11:07
I installed the YNZ underdash and taillight wiring loom in my Ranchero.  Easy installation and quality products.
Title: Re: Reproduction Wiring Harnesses
Post by: Randyh on 2016-09-12 17:16
Did the Narragansett or YNZ match the originals?
Title: Re: Reproduction Wiring Harnesses
Post by: BWhitmore on 2016-09-12 17:58
The YNZ wiring loom matched the original with correct terminal ends, color of wire, and correct texture of wire insulation. 
Title: Re: Reproduction Wiring Harnesses
Post by: Randyh on 2016-09-12 19:56
Thanks for reply.