If any of you have a repair kit for the upper shock mount would you post a photo of one for me. Mine were not on the car frame when I bought it so I drilled the support bar and extended the shock threaded bolt though it. It has worked now for several years but I hit a pothole with a friend in the back seat and the bolt broke, so I need to repair it better. I'll probably make a angle bracket and weld it but if the repair part looks like a descent application I may try and replicate a bolt on mount so I don't have to weld under the car.
Thanks in advance.
I took one of the bolt on shock hangers of mine. Is that what you're looking for? It was held on with a u-bolt over the round cross member.
Yes, that's what I am looking for, I would like to see what they look like. Thanks
I'm out of town until Monday evening. I broke the u-bolt taking it off but did keep the rest of it. If you haven't gotten a pic by then shoot me a pm with your # and I'll txt a pic to you.
I'm out of town until Monday evening. I broke the u-bolt taking it off but did keep the rest of it. If you haven't gotten a pic by then shoot me a pm with your # and I'll txt a pic to you.
Quote from: terry_208 on 2019-03-08 22:45
I'm out of town until Monday evening. I broke the u-bolt taking it off but did keep the rest of it. If you haven't gotten a pic by then shoot me a pm with your # and I'll txt a pic to you.
Why not post the pic here so others can see what it looks like?
No hurry Terry, thank you. I tried googling and eBay for postings but no luck. I appreciate your help. Safe travels
Quote from: Tom S on 2019-03-08 23:38
Why not post the pic here so others can see what it looks like?
I'll give it a try. I haven't updated my build and don't remember how to post. I'll have to refresh my self from my notes. Maybe Monday evening or perhaps Tuesday morning.
If its what I'm thinking of, you can have the ones I took off my Custom 300.
I sent an email.
!0/4, I responded but it may have went to your spam. I would like to have them, they're better than anything I could fabricate. Let me know where to send shipping amount and I would also like to pay you something for them. My address is on the email, I can do pay pal or send a check, whichever you prefer.
Thank you, Kerby
Those shock brackets are real interesting. It took me a few minutes to figure out how they work. Can't remember seeing anything like that.
I believe I do have a similar NORS kit somewhere. if I can find it, will post pics here just for reference.
It almost looks like they make one and they can be switched from left to right.
I got the second one out, and yes they are the same.
I really thought seeing one would give me the image to work with and make my own brackets. After seeing these and how they bolt on, looks better than anything I could come up with. I do not want to weld under the car if I don?t have to. Thanks to Les I won?t won?t have to do anymore than bolt them on. I appreciate you sending them my way Les.
Quote from: fdlrc on 2019-03-11 11:18
I got the second one out, and yes they are the same.
fdlrc....Like they always say
"A picture is worth a thousand words." Those shock brackets
are real nice.
The one I have is not nearly that nice. Mine is made from about 3/16 steel and can be used on left or right but is held on by a single u-bolt. I'll look it up tomorrow and try to post a pic.