57fordsforever.com

Classifieds => Wanted => Topic started by: John J Brady on 2019-10-12 10:51

Title: Cage Nuts
Post by: John J Brady on 2019-10-12 10:51
Need Eight Cage Nuts for a 57 Custom Hood Hinges.

Also Need the Two Cage Nuts for the top fender cowl mount.

Either used or if someone knows where to buy them.
Title: Re: Cage Nuts
Post by: lalessi1 on 2019-10-12 12:40
Try Restoration Specialties. restorationspecialties.com, (814) 467-9842. They are "old school" suppliers of all kinds of hard to find stuff.
Title: Re: Cage Nuts
Post by: rmk57 on 2019-10-12 12:50
  Didn't the top fender use hex head sheet metal screws?
Title: Re: Cage Nuts
Post by: RICH MUISE on 2019-10-12 13:07
I got mine at a paint supply house.."wee packs" IIRC.
rmk57.....the one place for the sheet metal bolt is the one under the windshield dogleg that you see when you open the door. #14 screw I think. Mine were too loose, so I opened them up for a 1/4" stainless lag bolt. The one that is the cowl mount that John mentioned is a cage nut for machine screw. I found some s.s. 5/16 hex flange bolts with serrations under the flange on ebay.
Title: Re: Cage Nuts
Post by: John J Brady on 2019-10-13 09:05
Thanks for the information. I'll give those a try.
Title: Re: Cage Nuts
Post by: KYBlueOval on 2019-10-24 05:08
John.........call Jerry's Classic Cars and Parts in Springdale AR.    479 750 1681  They do 100 point restoration work, primarily on Retractables. They have also done Rancheros. Very knowledgeable and have parts for resale.
John
Title: Re: Cage Nuts
Post by: chapingo17 on 2019-11-03 06:48
No sure were everybody lives, but I found cage nuts and a lot more mini hardware in true value hardware store.
Title: Re: Cage Nuts
Post by: John J Brady on 2019-12-27 15:47
Looking for (2) steering shaft sector bushings for a 58 manual box. Factory part # is: B8A3576A
Title: Re: Cage Nuts
Post by: KULTULZ on 2019-12-28 11:46
Quote from: John J Brady on 2019-12-27 15:47

Looking for (2) steering shaft sector bushings for a 58 manual box. Factory part # is: B8A3576A

GOOGLE B8A 3576-A and you should find them.
Title: Re: Cage Nuts
Post by: iamflashman on 2020-03-12 08:35
I have started to use weldin nuts for the cowl because of the unreliable nature of those cage nuts.

(https://live.staticflickr.com/65535/49651126128_aeb9f84a5b.jpg) (https://flic.kr/p/2iDuZYL)Fixed cowl fender nuts (https://flic.kr/p/2iDuZYL) by James Fleischman (https://www.flickr.com/photos/97922647@N00/), on Flickr

(https://live.staticflickr.com/65535/49651125413_346d648fd7.jpg) (https://flic.kr/p/2iDuZLr)Fixed cowl fender nuts (https://flic.kr/p/2iDuZLr) by James Fleischman (https://www.flickr.com/photos/97922647@N00/), on Flickr

(https://live.staticflickr.com/65535/49651936227_9f994ca605.jpg) (https://flic.kr/p/2iDz9MZ)Fixed cowl fender nuts (https://flic.kr/p/2iDz9MZ) by James Fleischman (https://www.flickr.com/photos/97922647@N00/), on Flickr

(https://live.staticflickr.com/65535/49651123073_1f732cc5eb.jpg) (https://flic.kr/p/2iDuZ56)Fixed cowl fender nuts (https://flic.kr/p/2iDuZ56) by James Fleischman (https://www.flickr.com/photos/97922647@N00/), on Flickr