Mostly complete `56 292 with small flange 4V intake, missing distributor. Turns over by hand. $100. Later 292 short block, turns over $50. B9TE heads, identical to factory supercharger heads, $275. "G" heads, need completely worked, $50. `57 higher ratio rockers, $50. Y block manual bellhousing, fork, flywheel $75. 390 block and 2U crank, $75, pick up only, no shipping. Have 7 390 rods with dish 390 pistons attached, $45. Also have a set of adjustable rockers, normal wear, as removed from 352, $85. Late style big passage oil filter adapter, $35. `58 Ford FE valve covers, nice shape, 2 pairs, $20 pair. New Ford racing windage tray, $30. Truck C6, $50. 1 C1AE head, 1 C8AE head, $25 each. 1 pair of `67-68 chrome Power By Ford valve covers, OK shape, $35. Timing covers, bead blasted, painted $25 each. FE bellhousing, $30 Alternator brackets, $10 set. If you want it all, come get all the FE stuff I have for $300 or all of the Y block stuff for $350. Finally, I have a `71 2-bolt block, vatted, not bored yet. Have a bare set of `70 closed chamber 4V heads, bare, need guides and seats have been converted to adjustable rockers. Nice used set of dome pistons, used, but nice shape with gapless rings and pins/spirolocks. Nice crank, rods with stock pistons still on them. Herbert solid flat tappet cam, I think .636 lift, 26? @ .050, big. Moroso valve covers, powder coated black. Also, `71 2V heads. All of it for $450, firm. If I cant get that for everything, I will separate it on ebay. Also have a good shifting C6 for a smallblock, have 4000 stall convertor $125. Located just north of Gulfport, MS. If you are planning on Cruising the Coast in October, I'll likely still have this stuff. Not many Ford people in South Mississippi.
James. I'll take all of the Y Block stuff. I'm sending you a PM.
Thanks, Glen
Thanks, Glen...Email sent... :hurricane:
James. email didn't come through! Send me a PM or give me a call. Thanks, Glen