In my 59 Galaxie with a 352. I know some things have been changed over the years as it has a later (wide) bolt pattern bell housing and a 69 Toploader 3 speed.
I am putting a 4 speed O/D in it and have everything out.
It has the early 153 tooth flywheel, but has the later starter. I question if the correct bendix is on it because it makes quite a bit of whine when starting.
I know there is a bendix made to fit the late starter which will work with the 153 tooth flywheel, but how can I conform I have it? The ring gear looks great and the pinion on the starter does too, but i dont think it's that old.
This was answered (not by me) on another forum -
QuoteJohn Vermeerisch at Total Performance is the guy to contact for a bendix that will work on the 153 tooth ring using the modern lever type starter. His part number is C5A-11350-TP (TP for Total Performance). John has a history with Ford and Ford engines. The gear on his bendix is machined to work so this is not apart number available from FoMoCo. Here is a link for contact:
https://totalperformanceinc.com/contact-us
I posted this for anyone else that runs across this problem.
BTW - The proper term is STARTER DRIVER. BENDIX is a GM term ... :090:
Thanks for posting that link, I think I have the same issue with one of my cars.
Since I am swapping the transmission to a T170F overdrive. I took out the bell, and flywheel. I ended up changing to 184 tooth ring gear on my existing flywheel. Now I can always use off the shelf later starter. Otherwise I would have changed the starter drive pinion gear to match my 153 tooth ring gear.