57fordsforever.com

Classifieds => Wanted => Topic started by: alvin stadel on 2021-09-01 17:35

Title: intake manifold
Post by: alvin stadel on 2021-09-01 17:35
Does anyone have a alum.  4 barrel Edelbrock for a 460. that is for sale. Thanks Alvin
Title: Re: intake manifold
Post by: Ford Blue blood on 2021-09-02 07:17
Alvin I have an aluminum intake for a 460, just need to dig it out, been too long since I looked at it.  Get back to you....
Title: Re: intake manifold
Post by: rmk57 on 2021-09-02 08:49

  Which one? Edelbrock make around 5 intakes for 429-460's.
Title: Re: intake manifold
Post by: alvin stadel on 2021-09-02 09:38
This for my next door neighbor, he building a 460 for his 68 mustang. The one he is looking for is a  performer RPM. He really dosen't want the air gap one, unless he can't find the RPM.  Thanks Alvin
Title: Re: intake manifold
Post by: brushwolf on 2021-09-07 21:41
I have a Weiand Stealth dual plane 460 intake which is a taller profile than an Edelbrock. It was brand new, but I put a functional Ram Air setup on my 73 Mach clone and the Weiand was too tall for the hood and ram air ducting. So, I had to pull it off and install an Edelbrock Performer which is quite a bit shorter.
Title: Re: intake manifold
Post by: Ford Blue blood on 2021-09-08 08:14
Sorry, the manifold I have was labelled as a 460 but is really an Edlebrock 351C for 2bbl heads.
Title: Re: intake manifold
Post by: alvin stadel on 2021-09-08 19:55
Thanks guys,. but I told Richard, my friend to go into Billings and stop at APC, hot rod shop. he did, and came back with a smile on his face bigger than a wave on a slop pail. They had exactlly what he wanted and for $360.00. Really made his day. Thanks again.
Title: Re: intake manifold
Post by: brushwolf on 2021-09-08 20:19
Quote from: Ford Blue blood on 2021-09-08 08:14
Sorry, the manifold I have was labelled as a 460 but is really an Edlebrock 351C for 2bbl heads.

Bill,

What you asking for the 351c Edelbrock 4v intake for 2 barrel heads?  I have 3 of them on motors in cars, but a 4th 351c 2v motor on a engine stand still has the factory iron 2v intake on it.

Thanks, Mike

Title: Re: intake manifold
Post by: Ford Blue blood on 2021-09-11 08:05
Mike, just what I paid plus the shipping.  $125.00  No idea what shipping will be. 

We can try a hand to hand thing if your not in a hurry for it.  I'm from WI, we go back home twice a year (minus weddings and funerals), summer and Christmas.  We hit Antigo first to visit with the wife's family.  One of my wife's brothers lives in Prescott, WI.  I can bring it to Antigo, he can pick it up there and bring it to Prescott and you can run over there to gather it up?

Let me know if and how....Bill
Title: Re: intake manifold
Post by: brushwolf on 2021-09-11 17:46
Not in a huge hurry, but I lean toward just shipping stuff these days when not too bulky.  Arrives at my door, no fuss, no muss.

I can either send a check now for the $125 and another for the shipping when you know what it is, or else just one check when you know what the total is and you can send package whenever you are satisfied check has cleared. UPS, USPS, Fedex all are ok and here most every week.

I will take a look to see if I can send you my address and you can send me yours via site PM.

Thanks, Mike
Title: Re: intake manifold
Post by: Ford Blue blood on 2021-09-12 07:08
Mike let me box it up and shipped.  I'll let you know the total then.  No need to have the post office (that don't need the "poke") loose more then one item.....
Title: Re: intake manifold
Post by: mustang6984 on 2021-09-13 00:42
Dang guys...I was just on the road to both of those areas not too long ago...mild shift in routes and I could have facilitated that swap thing. Timing is everything eh? LOL!!!
Title: Re: intake manifold
Post by: Ford Blue blood on 2021-09-15 08:34
Mike hope to get time today to box that bad boy up and get it to the post office, let you know.
Title: Re: intake manifold
Post by: brushwolf on 2021-09-15 09:08
Ok
Title: Re: intake manifold
Post by: Ford Blue blood on 2021-09-15 15:54
On the way.  PM the rest of the story.