Text only | Text with Images

57fordsforever.com

General Category => General Discussion => Topic started by: terry_208 on 2021-11-02 13:34

Title: Taillight housing gaskets
Post by: terry_208 on 2021-11-02 13:34
I've been looking for gaskets to mount the fender extension to the quarter panel.  What have others used in this area?  Where were they obtained?  I see Dennis Carpenter has the gasket between the reflector and the extension.

Thanks.
Title: Re: Taillight housing gaskets
Post by: lalessi1 on 2021-11-02 13:46
Concours Auto parts shows them.

https://www.parts123.com/parts123/yb.dll?parta~dyndetail~Z5Z5Z50000051e~Z5Z5Z520173~P3.50~~~~S66L1FFWKS68112109066b~Z5Z5Z5~Z5Z5Z50000051e
Title: Re: Taillight housing gaskets
Post by: RICH MUISE on 2021-11-02 13:56
And be aware the Custom series is a different gasket than the Fairlane.
Title: Re: Taillight housing gaskets
Post by: terry_208 on 2021-11-02 16:09
Thanks for the replies.  That's exactly what I was looking for as I have a Custom.  For whatever reason, I couldn't seem to locate them. 
Title: Re: Taillight housing gaskets
Post by: RICH MUISE on 2021-11-02 17:27
" That's exactly what I was looking for as I have a Custom"..............the one Lynn posted a link to is "EXCEPT CUSTOM......... >>>>"
Title: Re: Taillight housing gaskets
Post by: lalessi1 on 2021-11-02 17:41
I bought the Fairlane ones and trimed them using the original Custom one as a template. I don't think Custom ones are being made.
Title: Re: Taillight housing gaskets
Post by: terry_208 on 2021-11-03 10:49
Quote from: RICH MUISE on 2021-11-02 17:27
..............the one Lynn posted a link to is "EXCEPT CUSTOM......... >>>>"

I missed the "except".  I have been wondering about trimming the Fairlane gaskets to fit the custom.  I don't have the original gaskets but have made a template from the housing and quarter panel.  Thanks for the assistance.
Text only | Text with Images