Print Page - dimensions or part # for solenoid seal

Title: dimensions or part # for solenoid seal
Post by: terry_208 on 2022-01-07 22:40

I've been looking for the part number for the solenoid seal for a T86/T85 but came up short. I did find dimensions for a T86 used in a Kaiser which was i/s: 0.313" x 0.625" o/s x 0.156" thick. This converts to a TCM part # 03061.

Does anyone have access to the og FoMoCo part number and/or dimensions? I have to imagine the T85 will take the same part.

Any help is appreciated.

Title: Re: dimensions or part # for solenoid seal
Post by: KULTULZ on 2022-01-08 04:23

Try Here - https://www.fifthaveinternetgarage.com/overdrive_parts.php

Or Here - http://www.vanpeltsales.com/FH_web/trans-partsprices-BW-ODparts.htm

Title: Re: dimensions or part # for solenoid seal
Post by: hiball3985 on 2022-01-08 10:42

https://www.macsautoparts.com/1949-1959-manual-transmission-overdrive-solenoid-seal-for-sliding-pawl-operating-rod-ford-mercury-49-13246-1.html

I see them on Ebay all the time also

Title: Re: dimensions or part # for solenoid seal
Post by: terry_208 on 2022-01-09 18:13

Thanks. I totally spaced the obvious places and went directly to trying to cross reference, for a local purchase.

57fordsforever.com

General Category => General Discussion => Topic started by: terry_208 on 2022-01-07 22:40