I had my stock steering wheel restored so I took my custom wheel off which hs been on for about 10 years , so I installed my stock wheel on looks great but it doesn't cancel my blinkers , I must be missing something, any ideas thanks .
Two things to check.
Make sure the turn signal switch bolts or screws are tight.
The make sure your wheel is centered and cam the rear cancel cam or C shaped bushing that hits the signals.
There also a spring on the cam that can break
Some pics of what to expect
The two little numbs on the switch is what get a canceled when the wheels turns and the silver C chapped bushing hits it.
Also note the position on the C shape vs the spokes. You can see the position on the horn ring to compare. It seems to have turned my photo
This is a wheel I got years back I have hanging on the wall.
Also not this switch is bad some of the wire were brittle and broke loose at the connection.
452AA80B-190D-460F-A4BF-4829980AC61D.jpeg7904D7CE-A293-415B-A28F-CDA16046EAE7.jpegEE3134E8-2010-4CA1-BF50-93C901CAFD52.jpeg
Thanks Guys my wheel is missing D3786451-466E-4F7E-BD0B-B3D573DEC741.jpegD3786451-466E-4F7E-BD0B-B3D573DEC741.jpeg the cancel part, doesn't look like it ever had one,
Does anyone know where I can get the c bushing to cancel the turn signals
There is loose one on ebay
https://www.ebay.com/itm/324373126872?hash=item4b86251ed8:g:H6QAAOSwU7lfrrA4
I think Dennis Carpenter might have them too.
Maybe the people who restored it took it off, did you contact them?
Thanks guys for all the info7031262E-A2BE-494E-9B6E-1B285947BE6A.jpeg