need a valley pan with the pcv hook up on it
Watch E-Bay, every 58 to 62 292 had a rear road draft tube. I just picked one up a couple months ago for my car.
Ray; You can simply drill a hole in flat area of your pan for a PCV valve grommet and fit valve right there with a hose running to your carb spacer vacuum port. Fabricate a plate with nipple for the old road draft tube and run a 1/2" tube or hose to a nipple fitted in bottom of air cleaner for clean air pickup. Seal the holes in oil cap, I used a type of duct tape. Tom.
just looking for one to replace the one that got destroyed I know the pan is the same as the one with a road draft tube but the back has a pcv in it and came on a 1957 t-bird and was told hard to find I can make one but a factory part looks and fits better