Print Page - 57 ranchero tail gate

Title: 57 ranchero tail gate
Post by: 2rusty57 on 2017-10-23 20:38

:unitedstates: Can anyone help me foresee the potential changes in using a 57 wagon tailgate on 57 ranchero There are top catches that won't be used. And what activates the star gear my latch only operates the top catches. Any thoughts. Thanks

Title: Re: 57 ranchero tail gate
Post by: 57chero on 2017-10-23 21:57

I know the top catches can be removed and a metal trim piece screws on the top of the tailgate then the stainless trim screws to it that turns it into a ranchero tailgate. The lift latch should operate the side latches unless your missing the rods inside the gate that pull on the latches to release it or they fell off which happens sometimes. I have some tailgate pieces if your missing any. You would also disconnect the key lock and install the steer head emblem to cover the hole.

Title: Re: 57 ranchero tail gate
Post by: 2rusty57 on 2017-10-24 08:31

It looks like there is a trim piece on the front above the latch and just under the chrome trim that I might need. Will look closer at the inside mechanism today. Thanks

Title: Re: 57 ranchero tail gate
Post by: 57chero on 2017-10-25 22:58

Maybe one of you wagon guys can explain how the tailgate and lift window operate, I'm not that familiar with the wagons compared to the ranchero. I'm not sure what parts you need but this is what I have, the latches that go on the jam of the tailgate and the parts that attach to them inside the tailgate that work with the pull up latch, also have the piece that covers the top of the tailgate and the stainless trim piece that goes on top.

Title: Re: 57 ranchero tail gate
Post by: Ford Blue blood on 2017-10-26 08:27

The "paws" that stick up through the top to latch the lift gate will come out of the latch mechanism very easy. Just need to remove the assembly from the gate to get after it. You will need to disable the lock mechanism on the gate handle. I just welded mine in the "unlock" position. The top of the gate has a separate piece the mounts on to it with several sheet metal screws and cover the hole for the paws. The stainless then mounts on it.

Title: Re: 57 ranchero tail gate
Post by: 2rusty57 on 2017-10-26 18:02

Thanks this is a great help I actually need that top piece that just below the stainless steel it has a contoured to it. And hinged supports for each side. Thanks

Title: Re: 57 ranchero tail gate
Post by: 57chero on 2017-10-26 23:03

2rusty57, sent you a PM.

Title: Re: 57 ranchero tail gate
Post by: 2rusty57 on 2017-10-28 16:23

Would like to hear from 57 chero

Title: Re: 57 ranchero tail gate
Post by: 57chero on 2017-10-28 19:18

Check your email , I sent you a PM through this site.

Title: Re: 57 ranchero tail gate
Post by: 57chero on 2017-10-29 13:34

Whats your zip, I will get you a total with shipping.

Title: Re: 57 ranchero tail gate
Post by: 2rusty57 on 2017-10-29 15:44

22827

Title: Re: 57 ranchero tail gate
Post by: 2rusty57 on 2017-10-31 20:21

It's in the mail and again thank you this forum has helped me so much. Just sign up but have review topics each night for two years. Its a big help

Title: Re: 57 ranchero tail gate
Post by: 57chero on 2017-11-08 23:53

2rusty57, In case you didn't get my PM, your parts are on the way.

Thanks

Title: Re: 57 ranchero tail gate
Post by: 2rusty57 on 2017-11-10 20:20

Thank you it arrived yesterday do u need more for postage thanks

Title: Re: 57 ranchero tail gate
Post by: 57chero on 2017-11-10 21:46

No, its all good.

57fordsforever.com

Technical => General Tech Discussion => Topic started by: 2rusty57 on 2017-10-23 20:38