Trunk Lock Replace

[wighty]

Does anyone know how to replace the key lock cylinder that is in the bezel on a Custom 300?  I have the whole Bezel assembly off the car.  I see what looks like a retaining pin going into the lock cylinder through the large diameter thread, but have no idea how to remove this except by drilling it out.

[Hoosier Hurricane]

If you have the key, turn the key all the way one way (I don't remember which way) and there will be a depression that you can push that pin into, and the cylinder will slide right out.  If you have no key, you'll need a locksmith to "pick" the lock and turn the cylinder.  John

[wighty]

Thanks John.