News:

Check out the newsletters posted at our main club site:  http://57fordsforever.com

Main Menu

Which radiator to use?

Started by meteor, 2007-12-05 09:29

Previous topic - Next topic

meteor

Here's the setup, 302SBF swap, waterpump with a driver side inlet so I can run the alternator low on the passenger side.

1. Should I buy a new crossflow radiator? not keen on the 'modern' look of these.
2. Will a stock 57 V8 rad fit in a 6cyl. rad support?
3. If I use the stock 57 6cyl. radiator and a pass. side waterpump inlet, will the alternator interfere with the rad hose?

thanks
check out my site: www.brightworkautoart.com

fomocochoptop

They Look like Stock style Radiators to me.   Iv'e had outlets changed  sides for me at my local radiator shops it shouldn't be an issue.

meteor

I just realized that there was a different rad used on the 57 V8 cars. Both my Ranchero and Ranch Wagon were 6 cyl. cars so I figured all the rads were the same.

Interesting that you had the outlets reversed, maybe that is the way to go.

thanks!
check out my site: www.brightworkautoart.com

shopratwoody

I've always had stock Radiators, with enough rows and in good condition. No problems even with
big motors..
Ron :004:
I hate blocksanding!