News:

Check out the newsletters posted at our main club site:  http://57fordsforever.com

Main Menu

Reamer for front spindle's lower ball joint.

Started by jumping jack flash, 2013-12-15 18:58

Previous topic - Next topic

jumping jack flash

Where can I get one of the reamers for enlarging the hole in the spindle for the lower ball joint. I'm installing late 70's spindle and disc brakes. The top ball joint is a bolt up, with even the same part number for the upper ball joint. The lower will fit with a slight reaming to enable a fit.

Zapato

Zapato

Cruise low and slow.......Nam class of '72

rmk57

Got mine from a company called xkut.http://www.xkut-reamers.com/
1 1/2 TPF 7 degree taper. Used on lower balls and tie rod ends, works great.

Randy
Randy

1957 Ford Custom
1970 Boss 429

jumping jack flash

Thanks, I will go with the speedway reamer. :burnout: