I'm in need of a photo of the narrow end (lock assembly) of the Driver's door,

Started by KYBlueOval, 2016-09-05 04:16

Previous topic - Next topic

KYBlueOval

I'm working on the Driver's side door on my Ranchero and I do not have access to the passenger side door as a reference. My driver's side door has , what I believe, are some "extra" holes that a previous owner drilled, that I would like to weld up. But I'm not 100% sure they are extra, thus I'd like to see a photo of the "lock end" of a driver's door, before I weld up some holes I'll need Could someone on the Forum please take a photo of the narrow/lock assembly end of  a driver's side door. The area where these additional holes are located is about  4 1/2 inches below where the lock assembly mounts with three screws.
As always, thanks for your help.
John

Ford Blue blood

Certfied Ford nut, Bill
2016 F150 XLT Sport
2016 Focus (wife's car)
2008 Shelby GT500
57 Ranchero
36 Chevy 351C/FMX/8"/M II

KYBlueOval

Quote from: Ford Blue blood on 2016-09-05 07:49
Hope this is what you need....
Yes sir that is what I wanted to see. My door has four "extra" holes that I will now weld up and make it look right.
Thank you
John