Brake Light Plumbing

[Swank]

Afternoon,
Not sure where i got this photo from, but im dangerously close to putting my master back in and i like this brake light switch setup.  I have the brass banjo type fitting off the original master, but the bolt is too long.   My new master looks basically identical to this one (drums x 4), and it does have the inverted flare cone inside the connections.   I cannot find a banjo bolt with the npt connection in the back end of it.   Anybody have any ideas of how/with what this set up was accomplished?   Can it be done if the master has inverted flares?   The original master did not have the flare.

[RICH MUISE]

Can't help with the how and what, but here's a source for plumbing fittings, adapters, etc.
www.purechoicemotorsports.com
They are in Lake Havasu, machine their own fittings.

[rmk57]

 Or you could go with the pedal mount switch if you can find the correct fittings. You will need the plastic bushings and also have to lengthen the wires.