News:

Check out the newsletters posted at our main club site:  http://57fordsforever.com

Main Menu

removed spacer behind fan blade... problems with this??

Started by texasmark1, 2010-03-15 20:19

Previous topic - Next topic

texasmark1

took the spacer behind the fan blade off when I put a new radiator in cause it was just too close... so now my fan blade is that much farther (approx 3 inches) away from the radiator... anybody else done this?  has it caused an overheating problem??  I only have some around town easy miles on the car since rebuild...

anybody??

thanks,Mark
God Bless Texas!

tarheel57

Mark,you can buy different size spacers at almost any aftermarket auto parts stores. sounds as if you had a 3" spacer on there,they make them in 2 1/2" , 2", 1 1/2", 1", & 1/2" etc. The closer it is the better it will cool  :burnout:

4banger

Fan should be 3/4" to 1" away from the radiator. If you have a shroud, then the fan blades should sit halfway in the opening of the shroud.