Looking for Header Recommendations

[KYBlueOval]

Oops, I forgot, my crossmember is also home fabricated, so the full length exits may cause a problem with the stock crossmember.

Remaking or modifying the home built crossmember is not a big deal.
What headers are you using? Are they on a 351W with an automatic?
Thanks
John

[57chero]

There a billet aluminum adapter that bolts flush to the sbf heads and are shaped like a fe head with a set of holes for the fe valve covers to bolt to, a lot of the cobra kit car guys use them on the small block 427s to put big block cobra valve covers on. I see them on Ebay occasionally.

[57chero]

I changed up the motor a while back putting on a pair of 390 baldy valve covers mocked up to look like a y-block, fools a lot of people when they take a quick glance.

[Wirenut]

The Hedman headers part number is 88408. Floresville is just 20 muinutes S.E of San Antonio.
Good luck on your research and decision on your header choice.

[mustang6984]

San Antonio was my home town as a kid! I sill like to go there. Next time...I will let you know and we can go eat and have a brewski!   

[Wirenut]

Sounds good to me, I like brewski!

[KULTULZ]

I changed up the motor a while back putting on a pair of 390 baldy valve covers mocked up to look like a y-block, fools a lot of people when they take a quick glance.

Now that Sir, is class ...!!!

[KYBlueOval]

I used the Headman short headers for the mustang 69/70. I have a 302 with cavalier rack and pinion, no clearance issues. Mine are ceramic coated, if you want a part number let me know.
I tried some later year model 302 headers but the driver side would not fit, I tried to modify one pipe but it looke terrible since the ceramic coating was damaged with the welding. 

Wirenut....... I sent you a PM

John