Need 1 window roller

[Marc]

Looking for 1 metal OEM window roller as pictured. If you've got the associated springs and washers that would be wonderful.
I'd bought replacements from the usual suspects, but the cheap plastic looks like it'll break before long, and I'd rather not tear the door apart again to replace crappy chinese parts.

[gasman826]

Wow!  No body in your back yard have a window roller.  I think I still have a box of used ones in storage.  I have a really bad head cold and I'm not safe driving.  I'll put it on my list of things to look for the next time I get to the sea box.

[KULTULZ]

Looking for 1 metal OEM window roller as pictured. If you've got the associated springs and washers that would be wonderful.

I'd bought replacements from the usual suspects, but the cheap plastic looks like it'll break before long, and I'd rather not tear the door apart again to replace crappy chinese parts.

NDP shows what appears to be a quality replacement - https://www.npdlink.com/product/roller-window-regulator/138717

[RICH MUISE]

Maybe.......I'll check this afternoon.

[Marc]

I've checked with a few local boneyards but no luck so far.

Kultulz, that's a nice looking part. Better than the plastic ones at least. Looks like they're out of stock though.

[KULTULZ]

Kultulz, that's a nice looking part. Better than the plastic ones at least. Looks like they're out of stock though.

Maybe give them a call and ask if they think it will be available and when.

[RICH MUISE]

I found the one I have, but it appears to be a little different. The wide flange at the bottom (of your pic) on mine is actually a grove.........visualize a tiny fan belt pulley. Maybe that's why you're looking for one?, or the pic you have shown is misleading. It still has the spring and retaining clip, but no washers. It's a bit rusty, but I think it'll clean up fine.
If you want it, send me a pm with your address and I'll get it in the mail.

Rich

Opps...........it's not a groove........it's the (angled)washer you mentioned. the spring was pushing it tight against the angled flange making it look like a groove.

[Marc]

Thanks guys. I shot an email to NPD, waiting to hear back.

Rich, I'll take the one you have.  PM sent.

[RICH MUISE]

I'll get it in the mail today or tomorrow.
Got it mailed, You may have it as soon as Saturday.

[Marc]

Outstanding. Thanks Rich!

[CobraJoe]

 

[Marc]

Finally heard back from NPD. The owner of the shop that used to make the steel rollers has cancer. They're trying to find another shop to make them but apparently it hasn't been easy.

[cokefirst]

I have a couple of them.  They were used on the Thunderbird also and the Thunderbird parts suppliers have them.  I can send you a used one if you like.  Email me at Cokefirst@aol.com and give me your name and address and I will drop one in the mail.

[KYBlueOval]

I have a couple of them.  They were used on the Thunderbird also and the Thunderbird parts suppliers have them.  I can send you a used one if you like.  Email me at Cokefirst@aol.com and give me your name and address and I will drop one in the mail.

What is the range of years that they were used on Thunderbirds...... if you know.

[KULTULZ]

What is the range of years that they were used on Thunderbirds.