57fordsforever.com

General Category => General Discussion => Topic started by: Wirenut on 2013-10-07 21:54

Title: Part interchange help
Post by: Wirenut on 2013-10-07 21:54
Can any one tell me if the rear 1/4 glass and frames from a 57 Lincoln Premier will interchange with a 57 Fairlane 63A (2 door no post). The part numbers for the 57 Fairlane are BAC6329944A and the part number for the Lincoln is BY6029944A. They look the same and I am in desperate need for a set so I can complete my car and get it on the road. I am afraid I know the answer but they look identical and I hate to miss out on a set since I have not had any luck on locating a set. I would appreciate any help in this matter from the wise men of 57 Fordsforever...Thanks
Title: Re: Part interchange help
Post by: Ford Blue blood on 2013-10-07 22:40
Have you tried "The Ford Barn"?  They have a bunch over there that has lots of back ground with Fords in general.  There's one guy that has answered nearly every parts number question that has been posted.
Title: Re: Part interchange help
Post by: Zapato on 2013-10-07 23:23
Wow! Did a Google image search and the rear glass looks like it might work. But nothing forward of the door glass looks workable. Be interesting if they do. Is there a glass guy in your area that does old cars and has patterns ? If so he'd be the guy to ask.  Keep us posted.

Have you placed a Wanted ad on this site ? If not do so.

Zap-
Title: Re: Part interchange help
Post by: Boss/Cyclone on 2013-10-08 05:49
According to classicflatglass.com the Lincoln glass is 2 inches taller than the Ford glass, but the same length.
Title: Re: Part interchange help
Post by: Boss/Cyclone on 2013-10-08 06:01
Try these guys, they have a 57 hardtop in there junkyard. 

All American Classics, Inc.
15209 NE Fourth Plain Road
Vancouver, WA 98682
360.254.8850    800.955.4999    FAX 360.253.5986
Hours: Tues-Friday 8:30-5:00  Saturday 8:30-3:30   Closed: Sunday & Monday
Title: Re: Part interchange help
Post by: Boss/Cyclone on 2013-10-08 06:08
Also, there is a guy here in Michigan parting out one.
(http://images.craigslist.org/00V0V_lFglSbvX7BV_600x450.jpg)
Title: Re: Part interchange help
Post by: RICH MUISE on 2013-10-08 07:22
Keep us posted, Kerby. I may be in Phoenix next week..can check out the yards there for you if you still need. We may need to cancel our trip because of a looming furlough my wife may get first of Nov. due to government shutdown. #$@**$#! We were planning on leaving Thursday night, but the prospects of our income being cut off got us a little worried to say the least.
Title: Re: Part interchange help
Post by: Wirenut on 2013-10-08 16:45
Thanks for the responses. I do not have a local source for the glass cutting specs. All I know is I would have to take my old glass to use them as templates. The frames look so close and the part number too. I did post a need on the wanted section but no luck. I will try the sources you have suggested. Boss thanks for checking out the measurements, that helps nail it down, Rich and Zapato, and Blue hood Thanks for your help..
Title: Re: Part interchange help
Post by: Zapato on 2013-10-08 16:46
There are several "Salvage Yards" listed in the parts suppliers list. One of them is bound to be able to help you.

Zap- :unitedstates:
Title: Re: Part interchange help
Post by: RICH MUISE on 2013-10-08 17:02
I understood you were looking for the glass and frames, is that correct?
Title: Re: Part interchange help
Post by: Wirenut on 2013-10-08 20:45
Yes I am looking for the glass and frames but will take just the frames.. Just an FYI i tried the recommended locations from earlier and no luck. I did post a request on the ford barn. I will see what that turns up. Thanks Rich..
Title: Re: Part interchange help
Post by: Frankenstein57 on 2013-10-08 21:19
If I could make a suggestion, put your location in your avatar. Someone might know of a car nearby, but don't chime in because you might be half way across the country
Mark
Title: Re: Part interchange help
Post by: Wirenut on 2013-10-08 21:58
Good idea, Thanks and done..
Title: Re: Part interchange help
Post by: hiball3985 on 2013-10-09 08:37
Quote from: Frankenstein57 on 2013-10-08 21:19
If I could make a suggestion, put your location in your avatar. Someone might know of a car nearby, but don't chime in because you might be half way across the country
Mark
I wish everyone would do that. I also wish it was a requirement when joining.
And no Jeff, Polakaville doesn't count  :003:
Title: Re: Part interchange help
Post by: Jeff Norwell on 2013-10-09 14:10
Quote from: hiball3985 on 2013-10-09 08:37
I wish everyone would do that. I also wish it was a requirement when joining.
And no Jeff, Polakaville doesn't count  :003:



Jim,I am .....crushed.
Title: Re: Part interchange help
Post by: hiball3985 on 2013-10-09 15:41
Quote from: Jeff Norwell on 2013-10-09 14:10


Jim,I am .....crushed.
Damn I didn't even spell it right  :003: Maybe if it had a zip code it would qualify.
Title: Re: Part interchange help
Post by: Ecode70D on 2013-10-09 21:46
   Do you remember the old comic book character called Joe Palooka in the 40s and 50s ?  If I remember correctly he was boxer and was so strong that he used to pedal a tricycle with his house attached to it.
Title: Re: Part interchange help
Post by: hiball3985 on 2013-10-10 10:03
That's the first thing that came to mind when I saw Jeff's location  :003:
Title: Re: Part interchange help
Post by: Jeff Norwell on 2013-10-10 11:04
The Light is always on here in Palookaville..... what's a zip code? :burnout:
Title: Re: Part interchange help
Post by: Ecode70D on 2013-10-10 11:24
Quote from: hiball3985 on 2013-10-10 10:03
That's the first thing that came to mind when I saw Jeff's location  :003:

That's the first thing I thought of also.  So that means it's not my imagination.
Title: Re: Part interchange help
Post by: Ecode70D on 2013-10-10 11:33
Quote from: Jeff Norwell on 2013-10-10 11:04
The Light is always on here in Palookaville..... what's a zip code? :burnout:

     I think that a zip code is a plot of ground where you plant your tee pee posts.   You need one of those before you zip yourself in.
     Nope it can't be that...   Zippers weren't invented yet.
      Guess I don't know.
Title: Re: Part interchange help
Post by: Jeff Norwell on 2013-10-10 13:05
HA!
Title: Re: Part interchange help
Post by: hiball3985 on 2013-10-10 20:44
Besides the comic books there was a movie made in 1934
Title: Re: Part interchange help
Post by: Ecode70D on 2013-10-11 21:11
Wirenut... It looks like we hijacked your thread...sorry.

Jim.....  I'm glad that you found that picture of Joe Palooka.   I didn't know that he made a movie.  I thought he was just in the comic books.
Title: Re: Part interchange help
Post by: hiball3985 on 2013-10-11 22:15
Quote from: Ecode70D on 2013-10-11 21:11
Wirenut... It looks like we hijacked your thread...sorry.

Jim.....  I'm glad that you found that picture of Joe Palooka.   I didn't know that he made a movie.  I thought he was just in the comic books.
We have only hijacked it temporarily until the window frames show up  :003:
The Palooka movie has Jimmy Durante as his manager. Maybe only us old guys remember him.