57fordsforever.com

General Category => General Discussion => Topic started by: clusterbuster on 2014-08-29 07:48

Title: tire dismounting
Post by: clusterbuster on 2014-08-29 07:48
It's been more than fifty years since I have taken a 57 Ford tire off the rim. I am going to have to dismount a couple in a few days. If I recall they had to be removed from the rim on the inside rather than starting on the outside. Anyone have some advice on taking them off the rim? I don't want to butcher up the bead doing it wrong.
Title: Re: tire dismounting
Post by: Ecode70D on 2014-08-29 08:05
Cluster
I just had my 57 wheels broken down yesterday so I can clean them up.  Yes they do come off from the inside.   So you are right.
Jay
Title: Re: tire dismounting
Post by: clusterbuster on 2014-08-29 08:23
Thanks Jay. That's a big help. I am converting the front brakes to disk and had to buy 14x7" Ford Granada rims to clear the calipers. Using 68-69 Mustang rotors with the setup.
Title: Re: tire dismounting
Post by: sprink88 on 2014-08-29 09:51
Why not take the wheels to a shop and have them taken off?
Title: Re: tire dismounting
Post by: clusterbuster on 2014-08-29 18:14
I have a shop. Have leased it out for the past nine years since I retired. I just didn't want to try to remove the tire from the rim backwards on my Coats machine and destroy the beads. The tires are in real good shape, but older. Thanks for your input.
Title: Re: tire dismounting
Post by: Ecode70D on 2014-08-29 21:35
Quote from: clusterbuster on 2014-08-29 08:23
Thanks Jay. That's a big help. I am converting the front brakes to disk and had to buy 14x7" Ford Granada rims to clear the calipers. Using 68-69 Mustang rotors with the setup.

Custerbuster
  If you have to take  your stock 14" front wheels off, I would like to buy one of them if it looks solid like this one without any slotted  openings.. 
Title: Re: tire dismounting
Post by: clusterbuster on 2014-08-30 08:52
Okay Ecode, I am just starting the conversion, so I am not sure when I will be doing the wheels. I am pretty sure they are like your picture, but will double check. Will let you know, probably sometime today. Not working on it today though.
Title: Re: tire dismounting
Post by: sprink88 on 2014-08-30 09:50
clutterbuster. haha, I got it now. You are using a machine. I thought you were prying the rubber off with bars. Way old school.
Title: Re: tire dismounting
Post by: clusterbuster on 2014-08-30 09:58
Right Sprink. Used to pry them off by hand in the fifties.
Title: Re: tire dismounting
Post by: clusterbuster on 2014-08-30 10:03
Jay, the wheels look like your picture. Probably would cost around $20 to ship by FedX. Make me a reasonable offer with shipping and I will give you my address to send the money.   Don
Title: Re: tire dismounting
Post by: Ecode70D on 2014-08-30 21:29
Don
    Sorry that I that I didn't get back to you sooner.  I had been gone all day.
  I'm sending I'm sending you a PM with my information. Jay
Title: Re: tire dismounting
Post by: Ecode70D on 2014-08-31 12:00
" I can't beleive this. Upon closer inspection, I found my wheels do have slots. " Quote
   
Don
    These things happen.  Thank you for checking what you have.    I'm just going to keep on looking.   Someone out there has one that he is not going to use and is willing to sell it.  Getting a set of non slotted 14" wheels on my car is another thing on my winter "to do  list".
Jay 
Title: Re: tire dismounting
Post by: wildhog on 2014-09-08 17:21
Jay, I have a wheel for you, just to dam lazy to mail it to you, I thought I had Jeff talked into coming down to the Melt down drags, and was going to send it back to you. So let's say it is Norwell's fault! Drop down to the moonshine run in Georgia and I will bring it to you. Really as I get the little Barn ready for winter, I will dismount it and send it to you. Tom
Title: Re: tire dismounting
Post by: Ecode70D on 2014-09-10 16:55
Quote from: wildhog on 2014-09-08 17:21
Jay, I have a wheel for you, just to dam lazy to mail it to you, I thought I had Jeff talked into coming down to the Melt down drags, and was going to send it back to you. So let's say it is Norwell's fault! Drop down to the moonshine run in Georgia and I will bring it to you. Really as I get the little Barn ready for winter, I will dismount it and send it to you. Tom

Tom
   The truth of the matter is no matter what happens,  we need to blame it on Jeff.   I will not be able to make it to Georgia though, so  I'll wait until you can get to it.   I do want to pay for the wheel and the shipping.  Remember,  it has to be non slotted.  Do you still have my address? Jay
Title: Re: tire dismounting
Post by: Jeff Norwell on 2014-09-15 17:16
ha ha ha? Blame away!
I am used to it.
Title: Re: tire dismounting
Post by: wildhog on 2014-09-18 21:00
But Officer, This is Jeff Norwell's car! He just let me use it!
Title: Re: tire dismounting
Post by: Jeff Norwell on 2014-09-19 04:54
Quote from: wildhog on 2014-09-18 21:00
But Officer, This is Jeff Norwell's car! He just let me use it!

ha ha :003:
Title: Re: tire dismounting
Post by: Ecode70D on 2014-09-19 09:22
Quote from: wildhog on 2014-09-18 21:00
But Officer, This is Jeff Norwell's car! He just let me use it!

So Tom.... I want to get this right.
     Jeff told me that when he comes to Massachusettes,  he wants to see how my car goes.
     Does that mean if we get stopped on the highway "testing it out", all I had to say to the trooper is ...This is Jeff Norwell's car!   
     That'l get me off the hook.  Right? 
      After all, everywhere he goes, he knows someone important. Jay