Anybody know what an original trunk divider looks like and where/how it attaches.
Are asking about the cardboard, similar to the kick panels that is between the back of the trunk and the rear seat?
http://www.ebay.com/itm/57-Ford-Trunk-Divider-/201385188717?_trksid=p2141725.m3641.l6368
picture is generic
I think Dennis Carpenter sells them, so they should have a pic in their catalog. I think they attach along the weld flange at the trunk dropoff and wheel well. I'm gonna make some eventually, not sure how they attach up tp at the fender. In hindsight, I should have welded some tabs before bodywork and paint. There must be an easy way to do it afterwards.....look at all the cars at shows that have upholstered trunks, and I would think very few of them hit an upholstery shop for prep before paint.
I was not sure what Lynn was asking..and I was about to make mine......Damn I love this site.
Just thinking back to the old days we use to weld sheet metal in that area in our circle track cars for a safety barrier. I think if I had a passenger car today I would do that again..
aluminum highway signs work great!!!
I am gonna make mine, I am talking about the divider behind the rear seat. I saw that divider on eBay but I wasn't sure that they are reproducing the original design. For some reason I remember the divider being on the seat side and there is a perfect recess there? I don't think the Dennis Carpenter stuff is for a Custom. I bought an FRP 4x8 sheet for cardboard stuff. Package tray came out great.
Quote from: lalessi1 on 2017-02-11 17:48
I am gonna make mine, I am talking about the divider behind the rear seat. I saw that divider on eBay but I wasn't sure that they are reproducing the original design. For some reason I remember the divider being on the seat side and there is a perfect recess there? I don't think the Dennis Carpenter stuff is for a Custom. I bought an FRP 4x8 sheet for cardboard stuff. Package tray came out great.
I think you are right Lynn, it went on the seat side and that recess is were we would weld in the sheet metal.
Guess I posted before I had enough coffee....was talking about the side panels, not behind the seat. My car has fold down seats in the back (just in case I decided to take up surfing), so I left it open. Good thing...it sure came in handy when my trunk solenoid wasn't working.
Sorry, Jeff.
Quote from: Jeff Norwell on 2017-02-11 13:51
I was not sure what Lynn was asking..and I was about to make mine......Damn I love this site.
Jeff
Like we discussed on the phone, that one in the picture is NOT THE ONE for your business coupe application .
This is what yours should look like. Even though they are both for 57 Fords, It would be like comparing oranges to apples just because they are fruit.
The mounting screws are correct, and in exactly the same location as my original panel that I copied. On the BC application, the back panels are attached with chromed screws and concave washers.
The side panels are attached with push in clips.
FWIW the BC rear side panels are totally different also. They don't even somewhat resemble
a regular car panels.
I'm not trying to steal this thread. I'm just trying to keep the guys that are building / making a
Business Coupe from making an expensive and time consuming mistake..
Jay
The 70D interior is something I was curious about as well. So the panel I am talking about is rectanglar and mounts behind the seat on the inside of the car...? I am assuming it was held on by clips (there was one or two still on my car).
Quote from: Ecode70D on 2017-02-12 05:30
Jeff
Like we discussed on the phone, that one in the picture is NOT THE ONE for your business coupe application .
This is what yours should look like. Even though they are both for 57 Fords, It would be like comparing oranges to apples just because they are fruit.
The mounting screws are correct, and in exactly the same location as my original panel that I copied. On the BC application, the back panels are attached with chromed screws and concave washers.
The side panels are attached with push in clips.
FWIW the BC rear side panels are totally different also. They don't even somewhat resemble
a regular car panels.
I'm not trying to steal this thread. I'm just trying to keep the guys that are building / making a
Business Coupe from making an expensive and time consuming mistake..
Jay
That is the pattern I have Jay...I am staying the course and finish what I have. Thanks Jay!
Quote from: lalessi1 on 2017-02-12 07:59
The 70D interior is something I was curious about as well. So the panel I am talking about is rectanglar and mounts behind the seat on the inside of the car...? I am assuming it was held on by clips (there was one or two still on my car).
Lynn
That's correct... The other panel is mounted behind the seat and inside the car for sure.
Unfortunately, I don't know how it is held in place if , it was with clips or screws. I am certain that they have a totally different overall shape.. Jay.
Jay,
Thanks for sharing the differences in the Business Coupes.
Is you car going to be a the E&F-Code 57 Ford Reunion at Carlisle in June?
Pat
Pat
There is a world of differences behind the front seat of a business coupe. For example the cardboard side panels are totally different from normal and they are not covered with fabric. Also the inner wheel well housings are covered with a boot on each side just to name a few things.
I can't make it to the 57 reunion in Carlisle. I have other commitments at home.
Please send me a PM with your email address.
Jay
The divider from mine (Custom 300 4-door) has been sitting in my basement forever, I took it out years ago because the cardboard where the clips hold it was deteriorated to the point that there was nothing for the clips to hold. Other than that though its still pretty much in one piece.
I'm working tonight but tomorrow afternoon I'll dig it up and post some pics.
Marc
It's great that you have still have that panel for a sample. The cardboard material is still available or reproduced. You should have no problem making a new one using yours as a template. Jay
Ok! Awesome. Now I need the clips, I have one.... :003:
Here's my old divider. I'm pretty sure its original, since the car hasn't been apart until I got my hands on it. It fits pretty neatly into the recessed edges of the hole behind the back seat. Clips are long gone though. Should be easy to replicate, I'm thinking I'll use the ABS plastic like Guenter used on his kick panels.