News:

Check out the newsletters posted at our main club site:  http://57fordsforever.com

Main Menu

wagon/ranchero gas tank

Started by 58villager, 2025-11-06 09:36

Previous topic - Next topic

58villager

Hey all. has anyone used a classic industries wagon/ranchero fuel tank? any tips, suggestions? is there any material between tank and body? also noticed it appears to be just a bit shorter (front to back) about an inch. thanks Gerald
58 edsel villager big block (300 6cyl )58 edsel bermuda resto. project,78 ford king cobra 5.0/4speed

1930artdeco

I used the auto city classic tank-I think this is what you are referring to-and I didn't have a problem installing it in my wagon. I just added a bunch of insulating pieces on the top for vibration between the tank and body.

Mike
1930 Model A Townsedan
1957 Country Sedan

58villager

Mike, thanks for the response. don't know if that's the same people i got mine from, it seems like these guys are in MN or WI, would have to go back and find the website. same thing, padded top w/roofing felt strips. did have to add some spacers on the strap bolts (about 1") for the straps to pull up tight. did have the 2 fuel pick-up points. Gerald
58 edsel villager big block (300 6cyl )58 edsel bermuda resto. project,78 ford king cobra 5.0/4speed

58villager

quick update/edit. it was auto city classics in MN. Gerald
58 edsel villager big block (300 6cyl )58 edsel bermuda resto. project,78 ford king cobra 5.0/4speed

RICH MUISE

We had a spammer here that I deleted and banned. Hugh's post was deleted as well because after deleting the spam, it looked like his post was refering to 58 Villager's post. Thanks again for the notification, Hugh.
I can do this, I can do this, I, well, maybe

mustang6984

Thanks for the Hoover job. No problem with my post...not needed after the clean-up.  :003:
Nothing is impossible...
The word it's self says I'M POSSIBLE  (Audrey Hepburn)

2 '57 Ford Couriers AND '57 Fairlane
3 Mustangs, '69 fastback-'84 SVO-'88 Saleen Convertible
'49 Ford P/U
'50 Dodge P/U
'82 RX-7
'65 Chrysler New Yorker

cos

Hello  Ford originally used (5)? would say 2"X 4" 3/16 thick rubber pieces at back of tank. I believe where tank contacts the rear crossmember.  Under tank straps had  thin cloth type material between tank straps, I used cloth friction tape. all this is from memory. 

1930artdeco

That is correct. I think mine still has the rubber strips on the top of the tank to prevent rubbing/squeaking-I installed a new tank as my original tank needs to be scrubbed clean to be used again.
1930 Model A Townsedan
1957 Country Sedan

mustang6984

Quote from: cos on 2025-12-31 07:53Hello  Ford originally used (5)? would say 2"X 4" 3/16 thick rubber pieces at back of tank. I believe where tank contacts the rear crossmember.  Under tank straps had  thin cloth type material between tank straps, I used cloth friction tape. all this is from memory. 

I have bought a bicycle tube in the past, split it length-wise, and then used it on the straps. Works well.
Nothing is impossible...
The word it's self says I'M POSSIBLE  (Audrey Hepburn)

2 '57 Ford Couriers AND '57 Fairlane
3 Mustangs, '69 fastback-'84 SVO-'88 Saleen Convertible
'49 Ford P/U
'50 Dodge P/U
'82 RX-7
'65 Chrysler New Yorker